PUNCH PRESS
12Pages

PUNCH PRESS

Faster, More Precise, More Environment Friendly... ERMAKSAN is one of the leading companies with its punch presses range thanks to its experience gained through long years and brand awareness. ETP-S CNC Servo Turret Punch Press quality is crowned with hydraulic-free Servo Drive construction and combines globally accepted electronic and mechanical components in one machine. ETP-S CNC Turret Punch Press allowing various applications up to 6 mm thick sheet metals is designed to meet consumer needs for long years with its steel construction and mono-block structure. Minimum energy consumption...

REDUCED DOWN-TIME RISK Wearing is minimized by using less mechanical parts thanks to Direct Drive Servo technology. ENVIRONMENTAL FRIENDLY Minimum oil consumption thanks to servo motor technology and environment friendly by low power consumption because of no oil cooling requirement. REDUCED NOISE LEVEL Provides a quiet operation environment by removing hydraulic pump, motor and cooler of the hydraulic system and the noise generated from them. LOW ENERGY CONSUMPTION Provides 40% lower power consumption compared with hydraulic punches by keeping power level at minimum during stand-by.

etp-s GENERAL SPECIFICATIONS Servo-Electric Hammer System Specifications • Maintenance-free oil-free, long service life • Low energy consumption, minimum 40% power saving • Problem-free long service life with less mechanical parts thanks to its unique design • Speeds and low, medium, top punching positions can be programmed as requested with flexible programmable stroke structure • All positioning actions are more precise since Servo-Electric hammer system is driven with servo motor • Provides always maximum torque even at high and low speeds • Enables stamping and nibbling spft punch,...

TECHNICAL SPECIFICATIONS ETP-S 1500x3000 ETP-S 1500x2500 ETP-S 1500x2500 ETP-S 1500x2000 MAXIMUM TONNAGE Ton (Us Tons) MAXIMUM CAPACITY (X, Y) mm (inc) STATION QTY ON TURRET Pieces MAXIMUM PUNCH DIAMETER (Sheet is 1 mm (0,04”) thickness) (Single tool) mm (inc) X AXIS TRAVEL mm (inc) X AXIS SPEED m/dak (inc/sec) Y AXIS TRAVEL m (inc) Y AXIS SPEED m/dak (inc/sec) X + Y DEPENDENT SPEED m/dak (inc/sec) TURRET ROTATION SPEED Rpm AUTO INDEX ROTATION SPEED Rpm MAXIMUM PUNCH STROKE For Marking 1 mm (0,04”) Stroke Stroke/min MAXIMUM PUNCH STROKE For 1 mm...

standard equipment • 27 or 33 station turret options • O type hardened mono-block rigid body • Hardened housing system for each station in turret • Fanuc CNC and dynamic brushless alpha series servo motors with highly precise absolute encoder (no reference required) • 3 automatic re-positioning clamp system and sheet metal controlling switches (4 at machines with 3000 mm axis) • Sheet metal controlling switches on clamps • Aluminium clamp carrier body • User friendly display panel and software developed by Ermaksan engineers • Automatic tool lubrication system (Airblow) • 1 CAD/CAM software...

OPTIONAL EQUIPMENT forms • Pilot calibration tools Plus, MOVIC) • 3 and 8 multi-tool stations • Tool grinding machine • Adaptors for various stations (B, C, D) • Light barrier (standard for machines carrying CE mark) • Additional sheet metal holder clamps • Work-chute table • Stainless ball bearing table • Automatic loading - unloading system • Extra hydraulic oil cooling system • Automatic central lubrication system • Scrap suction unit • Automatic positioning and second usage license for Workpieces are manufactured without damaging and smoothly thanks to special brush system • Automatic...

turret head GENERAL SPECIFICATIONS Thick turret system Operation with multi tools Tool holders with housing Anti-backlash reducer structure on indexes Direct drive driven indexes ETP-S CNCTurret Punch series manufactured by ER-MAKSAN has two alternatives of 33 and 27 stations; in 33 stations models three of them indexable D stations and may include 8A, 3B or 1C multi-tools upon request. Therefore the tool quantity may be increased up to 54. Hardened steel coated tool adaptor system assures maintenance free long life working. Several forming operations are possible with the functional...

Turret 33 Station Tool Layout • 15xA stations 1/2” fixed 1.6-12.7 mm round, • 12xB stations 1-1/4” fixed 12.8-31.7 mm round, • 2xC stations 2” fixed 31.8-50.8 mm round, • IxD station 3-1/2” fixed 50.9-88.9 mm round, • 3xD stations 3-1/2” index 50.9-88.9 mm round, ■ Airblow allows automatic tool lubrication and extends tool service life. Pushes scraps down and avoids heating up of tools during working. Turret 27 Station Tool Layout • HxA stations 1/2” fixed 1.6-12.7 mm round, • 10xB stations 1-1/4” fixed 12.8-31.7 mm round, • IxC station 2” fixed 31.8-50.8 mm round, • 2xD stations 3-1/2”...

• Industrial controller with graphic display • Part program memory, SSD 2 MB • 1024 recordable programs • Off-line program simulation • Operation counter, part counter and stroke count display • Program transfer from USB or PCMCI memory cards or over Ethernet • Monitoring and supervising PLC over CNC • Controlling and supervising Servo and drives from CNC display • Stroke length-speed setting parameters • Inch / Metric conversion • Clamp zone protection function • Multitool control • Sheet metal cutting simulation • Total stroke counts for each tool and each program can be seen over CNC...

• User friendly software with pictogram for any specialized moulding processes such as punch, softpunch, forming, stamping, wheeled moulds, knockout tools, threading tools, and parameters and software to setting bottom, middle and top positions of stroke, speeds and waiting times enables high quality forming. • Program restart; automatically restarts the program resuming all the settings • Functions and options to operate patented specialized wheeled moulds such as wheeled Wilson or Mate • Functions adjusting speed and acceleration automatically according to sheet metal weight • Safety...