MESH CLEANING SYSTEMS Technical data sheet Cleaning systems are used to prevent the circular screen sieving meshes from getting clogged, thus al- lowing to always exploit their full potential. Different technical functions allow us to associate the screen to be treated with the most appropriate system: ball-, kleener- or brush-based. The ball system, particularly suitable for the tumbler screen, exploits the action of small balls, housed in a gap between the sieving mesh and the support mesh, connected for this purpose. Ball rebounding frees holes from any obstructions. The kleener system, particularly suitable vibrating screens, exploits the scraping action of small cones, hou- sed in a gap between the sieving mesh and a drilled sheet, installed to perform the operation. The cones vibrate and scrap the mesh holes, freeing them from any obstructions. The brush system, it too suitable for vibrating screens, exploits the vibration to spin brush sets installed on a special frame, overlapping the mesh. The brushes spin and free holes from any obstructions. Dimensions Applications 0 400 - Circular vibrating screen 0 600 - Direct discharge screen with one side motor 0 760 - Direct discharge screen with two side motors 0 900 - Direct discharge screen with central motor ERIMAKI SNC di Cecilia Janni & C. - Via Timavo 36, 20037 Paderno Dugnano (Milan) - Italy C.C.I.A.A 1169255 Codice Fiscale 07604340153 Partita IVA 02537230969