*mydirectindustry

R2411

Product catalog summary

Overview: The document discusses the importance of proper bonding in creating an equipotential plane between service grounds and equipment during fault and transient conditions. This is crucial for protecting people and equipment by maintaining a near-zero voltage differential. The grounding busbar is highlighted as a popular bonding product.

Specifications: The grounding busbar provides a single-point grounding and bonding location. Conductors can be welded using an nVent ERICO Cadweld exothermic connection or mechanically fastened with lugs. Custom bars can be designed to customer specifications.

Product Designation: The document provides a detailed breakdown of the ERICO Grounding Busbar Designation, including configurations (A, B, C, D), thickness, width, length, hole pattern, tin plating, cable code, and pigtail length.

Configurations: Various configurations are available, including Busbar with Insulators and Brackets, Busbar and Brackets, Busbar and Insulators, and Busbar Only. Each configuration has specific part numbers, hole patterns, mounting hole sizes, lengths, widths, thicknesses, and tin plating options.

Material and Certification: The busbars are made of copper and are certified with UL, UR, cUL, cUR, cULus, and cURus marks.

Warnings: nVent products must be installed and used according to the provided instruction sheets and training materials. Improper installation or misuse can lead to product malfunction, property damage, serious injury, or death, and may void the warranty.

Legal and Trademark Information: The document concludes with legal disclaimers and trademark information, noting that nVent reserves the right to change specifications without notice.

Catalog excerpts

Proper bonding is essential to create an equipotentiaL plane between service grounds and equipment during fault and transient conditions. This equipotential plane provides a near-zero voltage differential, and serves to protect people and equipment during these events. The grounding busbar is the most popular bonding product in use today. • Provides a convenient, single-point grounding and bonding location • Conductors are welded to the bar using a nVent ERICO Cadweld exothermic connection or are mechanically fastened by using lugs • Custom bars can be designed and manufactured to customer specifications Hole Pattern

Open the catalog to page 1

Material: Copper

Open the catalog to page 2

Diagrams are representative of the hole pattern. The number of holes is dependent on the length of the grounding busbar. Additional configurations are available by special order. Note special orders may incur additional lead time. UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC. WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other...

Open the catalog to page 3

All ERICO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list