Fixing, Fastening, and Support Products

Commercial builders, energy companies, data-center operators and industrial producers worldwide have long trusted nVent CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF and TRACER products for their electrical connection and protection needs. These market-leading brands have united under a new company: nVent. As nVent, established electrical brands that previously were part of the diverse Pentair offerings have joined forces under a single mission: the belief that safer systems ensure a more secure world. nVent connects and protects customers with inventive electrical solutions. Maximize your productivity....

Table of Contents INTRODUCTION NVENT CADDY SPEED LINK UNIVERSAL SUPPORT SYSTEM CABLE CONDUIT STUD WALL DATACOM/LOW VOLTAGE STRUCTURAL ATTACHMENTS NVENT CADDY ROD LOCK THREADED ROD MOUNTING SYSTEM NVENT CADDY PYRAMID ROOFTOP SYSTEMS METAL FRAMING TECHNICAL INFORMATION

All dimensions are ±5%. Product designs and specifications are subject to change without notice. For the most recent and updated information consult our website at nVent.com/CADDY WARNING nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at nVent.com/CADDY and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury...

Featured Products

Featured Products ROD LOCK – See Page 231 – The Rod Lock family of products allows contractors to prefabricate complex assemblies at ground level or offsite, and then easily lift and lock them into place by pushing the threaded rod supports into the Rod Lock device. This ingenious technology works with threaded rod with burrs or imperfections, helping to eliminate clean-up time or the need to replace damaged threaded rod. The most unique feature of the system is its breakthrough “push-to-install” design, which dramatically reduces the installation time of threaded rod support structures when...

Featured Products CAT HP – See Page 120 – The Cat HP J-Hook System is an advanced, non-continuous pathway support solution for today’s high-performance cabling systems. Highly engineered features help ensure a stable and secure installation that complies with industry codes and standards for highperformance cables. The Cat HP System is a cost-effective alternative to using wire mesh cable tray, ladder tray or similar complex alternatives. It requires significantly less material and installs in a fraction of the time of other methods. This versatile solution accommodates a wide range of attachment...

Featured Products TELESCOPING STRUT REPLACEMENT – See Page 462 – The Telescoping Strut Replacement is an innovative alternative to using strut-based trapeze or support structures to support cable tray, conduit or pipe. It eliminates the need for handling long lengths of strut and cutting sections of strut to size. The bracket telescopes to the desired length, attaches to threaded rod with a captive threaded nut at each end, and is locked in place by tightening a screw on a pre-installed steel band. • eady to use out of the box and eliminates the need for R cutting sections of strut • aptive threaded...

Featured Products NVENT CADDY SUPERFIX 243 – See Page 293 – • Includes easy closing mechanism • ategory II noise reduction C according to DIN EN ISO 3822-1 • ompliant for sound insulation C design according to DIN 4109 NVENT CADDY SWIFT CLIP STRUT CLAMP FOR TUBE/PIPE – See Page 316 – • ecures pipe while allowing it to expand, S preventing cracked and fractured joints MSS INLINE HAMMER-ON STRAP HANGER • nap-in and twist installation requires S no tools • its directly into vertical and horizontal F strut channels • upports pipe or duct from flange with S banding or strapping • se for installation...

Featured Products TDHM TRAPEZOIDAL DECK HANGER WITH FIXED NUT HAMMER-ON FLANGE CLIP, SIDE MOUNT HAMMER-ON FLANGE CLIP, BOTTOM MOUNT WITH STUD • Easy install • rovides an attachment for wire, P S-hooks, chain, Speed Link or other assemblies to flanges and profiles • Can be used to support boxes, fixtures or other applications from beam flanges • se TDHP perforation tool to punch U hole in decking • its most beams F I • nstalls with just a hammer • aptive threaded stud minimizes the C need for additional hardware • ssorted attachment points provided A to reduce inventory • equires only a hammer...

Featured Products RIGID BRACING CABLE BRACING 300M UNIVERSAL BEAM CLAMP BRANCH LINE RESTRAINT SYSTEM To help ensure the availability and operation of safety systems after an earthquake event, many building and industry codes now include requirements for the design and installation of seismic sway bracing for non-structural components, such as fire sprinkler, mechanical, electrical and plumbing systems. The innovative line of nVent CADDY Bracing Systems was developed to help keep fire sprinkler systems intact after a seismic event and to minimize water damage resulting from leaks or ruptures....

Featured Products ROD LOCK ANCHOR SCREW – See Page 233 – • For use with concrete and solid brick • Prefabricated assemblies easily lift and lock into place, helping to save time and money • orks with slightly damaged threads W and minor burrs on the threaded rod PUSH INSTALL ROD HANGER WITH SHOT-FIRE BRACKET CAT HP J-HOOK WITH SHOT-FIRE BRACKET • uspends threaded rod without the S need for additional hardware • rovides optimal support for highP performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic • omplete with shot-fire bracket and C pre-assembled drive pin...

Product Applications CABLE/CONDUIT