*mydirectindustry

Catalogs
ERICO
A12 Standard Coupler, Stainless Steel

A12 Standard Coupler, Stainless Steel

Product catalog summary

Overview: The A12 Standard Coupler made of stainless steel is designed for use in environments where corrosion resistance and high load-bearing strength are required. It is particularly suitable for applications such as bridges and bridge decks where exposure to de-icing salts, saltwater, or marine environments is common.

Specifications: The couplers are made from Duplex 2205 stainless steel, known for its strength and corrosion resistance. They are designed to splice bars of the same diameter, allowing for rotation and axial movement of the second bar. The slim design ensures that the concrete cover is maintained.

Dimensions and Weights: The document provides a detailed table listing the part numbers, rebar sizes (metric, US, and Canada), diameter, length, bar depth, bar gap, and unit weight for various coupler sizes. For example, the EL10A12SSN model is for a 10 mm rebar with a length of 49 mm and a unit weight of 0.17 kg.

Compliance and Standards: The couplers are designed to meet various international standards, including AASHTO, ACI 318, AS3600, Eurocode 2, and others. This ensures their suitability for a wide range of construction projects globally.

Installation and Safety: It is crucial that nVent products are installed according to the provided instruction sheets and training materials to avoid malfunction, property damage, or injury. These instructions are available on the nVent website and through customer service.

Disclaimer: nVent reserves the right to change specifications without prior notice, and all trademarks mentioned are owned by their respective owners.

Catalog excerpts

Stainless steel couplers are specified whenever corrosive environmental conditions combine with the need for high load-bearing strength. nVent LENTON stainless steel couplers are commonly used when the construction materials may come into contact with de-icing salts, salt water or marine environments. Typical applications include bridges and bridge decks. • Designed to splice the same diameter bars where the second bar can be rotated and is not restricted in its axial direction • Slim design maintains concrete cover • Installs quickly and easily • Duplex 2205 stainless steel provides a unique combination of strength and corrossion resistance Material: Stainless Steel Duplex 2205 (EN 1.4462) Finish: Plain Designed to Meet AASHTO, ABNT NBR 8548:1984, ACI 318 Type 1 (125% Specified Yield), ACI 318 Type 2 (Specified Tensile), ACI 349, ACI 359, AS3600, BS EN 1992-1-1, BS EN 1992-2, CAN/CSA - N287.2/.3/.4, DIN EN 1992-1-1, Eurocode 2, IBC Type 1 (125% Specified Yield), IBC Type 2 (Specified Tensile), ISO 15835, NEN EN 1992-1-1, NF A 35-020-1, NF EN 1992-1-1, ONORM EN 1992-1-1, Sellafield Ltd. Std. ES_0_3110, US Army Corps of Engineers Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

Open the catalog to page 1

WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. © 2019 nVent All rights reserved nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates....

Open the catalog to page 2

All ERICO catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list