Material Testing Machine for the Quality Control Software (intern) for Stand Alone Usage testing equipment for quality management Technical Description

General Information The compact material testing machines of the ® UNIMAT BASIC serie have been specifically designed to facilitate quality checks simple and fast. The machines are available with a capacity of 3 kN, 5 kN, 10 kN or 20 kN (higher forces on request). The robust construction of massive aluminium and stainless steel makes these testing machines suitable for in-process controls. For driving the cross-arm the Universal Testing Machines are equipped with electric motor drive (microprocessor-controlled, recirculating ball screw and bellows). The motor including controls as well as the...

Universal Testing Machine UNIMAT® BASIC 054, with two spindles and two bellows, has a separate control panel for lateral attachment or can be operated by remote control (keypad, LCD with 2-line display: force / displacement). Six versions of the testing machine are available (incl. load cell 10000 N): - Testing force 10 kN, travelling distance 700 mm / clearance 400 mm - Testing force 10 kN, travelling distance 700 mm / clearance 600 mm - Testing force 10 kN, travelling distance 700 mm / clearance 800 mm - Testing force 10 kN, travelling distance 1200 mm / clearance 400 mm - Testing force 10...

Long-travel feeler-arm extensometer MFE 900 The MFE 900 extensometer is specifically designed for applications with highly lengthening materials such as plastics and rubber, incorporating long travel (up to 900 mm). The MFE complements relatively low-cost instruments of the serie UNIMAT® BASIC, used for the testing of plastics. At this semi-automatic working measuring device, the position and the gauge length (Le) have to be set manually whereas the moving to this position and the gauge length as well the attachment at the specimen, are done by electromotive drives. The MFE is suitable for nearly...

The list represents only a small selection of grips.

Description Grips for Model 050-BASIC: Wedge Grips SZS7-10 (per pair) without jaws, tensile force 5 kN Pyramid jaws SZS7-BP (4 pcs./set) hardened, opening 0 – 8 mm, clamping surface 40 x 10 mm V-jaws SZS7-BV (4 pcs./set) 4 Stck./Set hardened, for round samples Ø 2 – 8 mm, clamping level 40 mm Small Vice Grip SZ140k-100N (per pair) incl. pyramid jaws, opening 0 – 8 mm, clamping surface 15 x 15 mm (63 g) Vice Grips SZ240k-1 kN (per pair) without jaws, tensile force 1 kN, opening 0 – 10 mm Pyramid jaws SZ240k-BP (4 pcs./set) hardened, clamping surface 30 x 30 mm V-jaws SZ240k-BV2 (4 pcs./set) hardened,...

Cardan joint SZ327-5 kN (per pc.) tensile force 5 kN Wedge Grips SZS7-10 (per pair) without jaws, tensile force 5 kN Pyramid jaws SZS7-BP (4 pcs./set) hardened, opening 0 – 8 mm, clamping surface 40 x 10 mm V-jaws SZS7BV (4 pcs./set) 4 Stck./Set hardened, for round samples Ø 2 – 8 mm, clamping level 40 mm Round Compression Plate SZ23-Ø56 mm - Al (per pair) with centring grooves Round Compression Plate SZ23-Ø96 mm - Al (per pair) with centring grooves 3-Point Bending Grip SZ238-300 mm –St (per pc.) pressure force 10 kN, bearing area 4 – 300 mm, with steel fins (radius optionally: 1, 2, 3.2 or...

Ord.-No. Description 00540452 Round Compression Plate SZ23-0116 mm - Steel (per pair) with centring grooves 00540552 Round Compression Plate SZ23-0156 mm - Steel (per pair) with centring grooves 00540652 Square Plate Chuck SZ36T-250 mm - Al (per pc.) with T-shaped grooves, size 250 x 250 mm 3-Point Bending Grip SZ238-300 mm - St (per pc.) pressure force 10 kN, bearing area 4 - 300 mm, with steel fins (radius optionally: 1, 2, 3.2 or 5 mm -please specify when ordering) Cardan joint SZ327-20 kN (per pc.) tensile force 20 kN Grips for Model 056-BASIC: 00560152 Wedge Grips SZ243-20 kN (per pair)...