ERICHSEN SmartPen Rolling test head „318 S“ with test tip Test head „318“ with test tip Rolling test head „435“ with test disc Rolling test head „435 S“ with test tool testing equipment for quality management Technical Description and Operating Manual 3 Force ranges: 0- 3N 0 - 10 N 0 - 20 N Hardness Test Pencil with digital Test

Safety Instructions There is a risk of injury when using the SmartPen wih test head and test tips. Therefore, if handled improperly, there is a risk of injury in the form of stab and scratch injuries ! Proper Use The ERICHSEN SmartPen is used to determine the scratch resistance of surfaces; depending on the used module, it can be used to determine the resistance to scratching, the tendency towards metal marking and the durability of printed markings. A Note of Concept The scratch resistance is perceived by a large number of users and for many years – incidentally not physically correct and therefore...

Application Using test heads 318/318 S Using test heads 435/435 S: Screw the test head with the selected test tip and spring. Switch the ERICHSEN SmartPen ON by pressing the button. With the locking device, the force setting of pencil is released or determined. Screw the test head „435“ with a test disc and the selected spring (after tighten the screw it must not be possible to turn the test disc). Place the SmartPen vertically on the test surface. The guide wheels must touch the surface. Switch the ERICHSEN SmartPen ON by pressing the button. -----------------------------------------------------------------------The...

The right of technical modifications is reserved. Group 14 - TBE/BAE ERICHSEN SmartPen - VI1/2021 Postfach 1264 I 58652 Hemer I Germany I Tel.+49(0)2372-8683-0 I Fax+49(0)2372-6430 I www.erichsen.de I [email protected]