Layer thickness measurement per scaled magnifier Layer thickness measurement with digital evaluation "WedgeSoft X" testing equipment for quality management (Thick Coat Gauge) Technical Description Thickness measurement of all coatings on any substrate Measurement of individual layers of a multi-layer coating Layer thickness measurement for layer thicknesses up to 6000 pm

PAINT BORER TCG (Thick Coat Gauge) Layer thickness measurement for "thick layers" up to 6000 µm, via defined drilling through the layer(s) to be measured; optionally with analogue (via scaled magnifier) or digital evaluation (via software). Purpose and Application The measurement of thick layers over 2000 µm on nonmetallic substrates (concrete, plaster, screed, wood, plastic etc. ...) is a potential technical, possibly also financial challenge for the user. Reliable non-destructive methods on non-metallic substrates, often cause a distinct price and require uncomfortable calibration. The destructive...

The reading/evaluation takes place: • By magnifier: By aligning the scale accordingly, measuring the obliquely drilled layer; distance from substrate to upper edge, reading the graduation lines; the layer thickness results from multiplying the graduation lines by the scale factor assigned to the wedge cut angle. Contrast lines are now positioned by cursor, i.e. at the transition contrast from substrate to coating, as well as at the upper edge of the coating. The software is activated by inserting the security dongle into the computer. After loading the image to be measured, the relevant image...

Subject to technical changes. TBE/TCG - XII//2023 Postfach 1264 I 58652 Hemer I Germany I Tel.+49(0)2372-9683-0 I Fax+49(0)2372-6430 I www.erichsen.de I [email protected]