- Catalogs
- ERICHSEN GmbH & Co. KG
- Technical Description Model 975 AP
Technical Description Model 975 AP
Technical Description Model 975 AP
The Display Instrument, Model 975 AP, is designed for quick and easy force measurements using ERICHSEN force transducers. It is suitable for various applications requiring rapid force measurement.
General Features
The device is housed in a sturdy aluminum box and operates on mains power. It features a clear LED digital display and an illuminated mains switch. The force transducer can be easily disconnected via a 7-pin socket, and fuses are accessible for quick replacement. A peak value memory is included, allowing retrieval of minimum and maximum readings.
Options
The instrument offers two adjustable limit value outputs for monitoring purposes. It can be equipped with an analogue output for voltage or current proportional to measured values. A unidirectional RS232 or RS422 serial interface is available for data transmission to a printer or PC.
Technical Data
- Housing: 255 x 270 x 110 mm, aluminum
- Weight: approx. 2.2 kg
- Measuring range: dependent on connected force transducer
- Measurement uncertainty: ± 0.1% of measured value, ± 0.05% of full scale
- Measuring rate: 10 / sec
- Temperature range: 0° C to 60° C (storage: –20° C to +80° C)
- Temperature stability: 0.05% / °C
- Humidity: 0 – 85% without condensation
- Power supply: 100 - 250 V / 0.05 A
- Display: 4½-digit LED, 0 - ±19999, 14 mm high
Options
- Limit value output: 5 – 24 V, 0.5 A external infeed
- Analogue output: Voltage signal: 0 – 10 V, 12 Bit, Accuracy 1% of upper range value, short-circuit proof; Current signal: 4 – 20 mA, 12 Bit, Accuracy 1% of upper range value, short-circuit proof (alternative 0 – 20 mA)
- Interface: RS 232 bidirectional
Order Information
Order No. 24800131 for Display Instrument, Model 975 AP. Subject to technical modification.
Catalog excerpts
Display Instrument Model 975 AP testing equipment for quality management Technical Description Force measurements simply and fast
Open the catalog to page 1
Technical Data Housing: Measuring range: uncertainty: ± 0.1% of measured value, ± 0.05 % of full scale Measuring rate: 10 / sec Limit value output: Analogue output: The Display Instrument, Model 975 AP, provides a convenient means of measuring and displaying forces in combination with ERICHSEN force transducers on a wire strain gauge basis. It is suitable for applications in all areas where forces need to be measured without bother and within the shortest possible time. Ease of operation makes this display instrument useful for a wide range of measuring tasks. The measuring and display electronics...
Open the catalog to page 2All ERICHSEN GmbH & Co. KG catalogs and technical brochures
Technical Description Model 14612 Pages
Technical Description Model 14512 Pages
Technical Description Model 14211 Pages
Technical Description Model 2958 Pages
- Kiln
- ERICHSEN testing machine
- Force sensor
- Measuring device
- ERICHSEN test chamber
- Electric furnace
- Test stand
- Tension/compression force transducer
- ERICHSEN temperature test chamber
- Steel load cell
- ERICHSEN automatic testing machine
- ERICHSEN material testing machine
- Strain gauge force sensor
- ERICHSEN hardness tester
- ERICHSEN climate chamber
- ERICHSEN quality control test chamber
- Computer-controlled test machine
- Stainless steel force transducer
- ERICHSEN portable tester
- ERICHSEN humidity test chamber