Hydraulic Load Cells Models 830 ■ 833 • 844 Manufacturer’s Test Certificate M testing equipment for quality management

ERICHSEN hydraulic load cells provide a simple and economical method of measuring forces. The technique is based on the hydraulic transmission of forces which act on the piston of the force transducer. This hydraulic pressure is immediately indicated on a display unit with a scale in Newton. Hydraulic load cells are mainly used in static applications. The increased force time (referred to the rated load) should remain constant for at least 1 second. Continuous rapid changes in force may destroy the pressure gauge. It can however be protected against shock loads arising when the load is applied...

Hydraulic Load Cells Load Cell 833 The display unit of the basic "A" version is attached directly to the load cell by way of a screwed connection. In the advanced "B" version the measuring instrument is connected to the pressure gauge by a high pressure hose or a capillary tube. The load cells in the Model 833 series are designed specifically for continuous use and can be fitted into machines, installations and systems of all kinds. A significant feature of this series is the accurate dial gauge with zero offset compensation and large diameter (100 mm). By using the appropriate accessories, the...

Hydraulic Load Cells Technical Data In the basic "A" version the display unit is attached to the load cell by way of a screwed connection. In the advanced "B" version the measuring instrument is connected to the pressure gauge by a high pressure hose or a capillary tube. Subject to technical modifications. TBE 830/833/844 - X2025 Load cells in the 844 series are suitable wherever a shaft needs to be fitted through the measuring device These instruments are specifically designed as a permanent monitoring facility for axial and bearing forces. They are equipped with a high-accuracy dial gauge which...