K PRINTING PROOFER The Illustration shows a typical plate together with various proofs obtained with standard plates, details of which are as follows: A Solid Area Plate 100 lines/inch (40 llnes/cm) Density: 100% 150 lines/inch (60 llnes/cm) Density: 100% 200 lines/inch (80 lines/cm) Density: 60% B Single 3 Wedge Plate 150 llnes/inch (60 lines/cm) Density: 100-80-60% Please note the proof shown has a typical company logo and address added. Densities, half area 90% and adjacent step wedge 100-90-80-70% D Double B Wedge Plate 150 lines/inch (60 lines/cm) Printing Plates Printing plates for use with the Printing Proofer are electronically engraved In exactly the same way as production cylinders. A choice of one or more of the standard plates available will normally be satisfactory but special plates including those with a logo and/or company details can be supplied. Maximum engraved area 160x95mm. ERICHSEN ERICHSEN GmbH & Co. KG Am Issrbach 14 I 58675 Hemer I Germany Ter +49(0)2372-9683-01 Fax +49(0)2372-64 30 Lltllngton, Royslon, Herts SG0 0QZ United Kingdom Teh -1-44 (0)1763 852187 Fax: +44 (0)1763 852502 E-mail: [email protected] www.rkprint.com High quality proofs using gravure, gravure-offset or flexo inks are produced instantly using the K Printing Proofer. Featuring electronically engraved printing plates and variable printing speeds of up to 40m/mln, this Is an essential tool for all those involved In the manufacturing or use of liquid inks. Ideal for R & D and computer colour matching data, quality control and presentation samples. The K Printing Proofer is very easy to clean and all parts are solvent resistant, MAIN FEATURES • Almost any flexible substrate can be printed or laminated • Excellent printabllity ensured by micrometer control • Multiple ink samples may be printed simultaneously for comparison purposes • High printing speeds enable use of Inks nearing press viscosity • Easy to operate with a footprint of just 400 x 500mm

K PRINTING GRAVURE Ink is transferred from an electronically engraved printing plate directly onto the substrate, which Is attached to the rubber impression roller, Doctor blade and roller adjustments are made via micrometers allowing repeatable settings for future tests. Both wet and dry laminated samples can be produced on the machine using the gravure head with K-Lam laminating accessories. This includes a rubber covered bed and K-Lam bars, replacing the doctor blade in order to control adhesive coating weight. Adhesive is applied in front of the bar and the machine then coats and laminates...