The first name in sample preparation equipment The first name in sample preparation equipment MULTICOATER K 3K303S 03 M ULTICOATER Simon Payne Design Engineer RK PrintCoat Instruments Ltd. Litlington, Royston, Herts. SG8 0QZ, UK Tel: +44 (0)1763 850915 E-mail: [email protected] Website: www.rkprint.com REPEATABLE SAMPLES Above: K303S Multicoater (Meter Bar Coating Head) Above:K303 MulticoaterBAR (Meter Bar Coating Head) STANDARD INFORMATION FOR METER BAR COATING Standard bar information for meter bar coating Close Wound Close Wound BAR No. BAR No. COLOUR Colour CODE Code WIRE Wire DIAMETER Diameter WET FILM Wet film DEPOSIT Deposit INCH Inch MICRON Micron White White Yellow Yellow Green Green Black Black Horn Horn Orange Orange Brown Brown Please refer to our K Control Coater leaflet for more details. Please refer to our K Control Coater leaflet for more details of alternative bar sizes The K303S enables accurate and reproducible This instrument enables accurate and reproducible prints and prints and coatings to be made using a wide range of QUALITY products, and to many substrates. Therange heads of products, and many coatings bedifferent made using a wide CONTROL detailed are fully and easily interchangeable, providing different substrates. The different heads detailed over are fully and Gravure and Flexo Printing and Meter Bar coating, giving exceptionally accurate surface coatings andGravure, laminations. easily interchangeable, providing Flexo and Meter Bar The smallest differences in products can be detected by coating, giving exceptionally accurate surface coatings and applying multiple samples adjacent to each other. laminations. The smallest differences in products can be detected MAIN FEATURES by applying multiple samples adjacent to each other. • Re-designed in 2022, base unit includes fully integrated servo drive and touch screen control MAIN FEATURES • Easily repeatable samples • Easily repeatable samples • Interchangeable heads • Interchangeable heads • Multiple coatings simultaneously for comparison • Multiple coatings simultaneously for comparison GLOBAL SUPPORT • Maximum coating areaarea 350350 x 440mm • Maximum coating x 440mm (meter bar coating head) (meter bar coating head) • Coating speed 1 – 39m/min • Coating speed 1 - 40m/min THE FIRST NAME IN SAMPLE

GRAVURE PRINTING HEAD K303S Gravure Proofer is used in laboratories for quality control on all conventional ink/substrate combinations for colour, printability, adhesion, etc. FLEXO PRINTING HEAD Utilises doctored anilox Flexo plates from which the ink is transferred via the plate roller onto the substrate. Photopolymer or rubber plates are made to your own design, including for instance company logo/address. Very fine pressure adjustments can be made to obtain a perfect print on most substrates by the use of micrometers. This also means that settings for any particular substrate can be recorded....