Testing Apparatus to carry out tests in altering climates as well as various salt spray and condensation water tests Corrosion chamber inclusive interface for connecting an Air Conditioning Unit te sting equipment for quality management Corrosion Testing Instruments Model 618 Technical Description

General Information In connection with preparatory treatment techniques and new materials, coating systems have achieved a high technical level. In addition, growing working requirements and environmental aspects are leading to further improvements of the coating systems. Therefore corrosion tests for quick quality monitoring and examination of weakest points are now as before indispensable. All corrosion testing instruments of the 618 series are „Made in Germany“. The test chambers are made of special resistant glass fibre reinforced plastic and are suitable for low-temperature cycles (down...

A separate reservoir (semitransparent) for the absorption of approx. 210 l spray solution is included in the scope of supply. For simple level control the tank is equipped with float switches. All versions of the 618 series can be combined with a Compact Air Conditioning Unit to cool the test chamber (all testers are already prepared for the connection of an air conditioner as standard.) Depending on the application the following versions are available: Compact Air Conditioning Unit for cooling the test chamber down to -20 °C and for the humidity control between 30% and 95% rel. humidity at +25...

The right of technical modifications is reserved. TBE 618 - IV/2019

Order Information Figure Corrosion Testing Apparatus, Model 618 with test chamber volume 400 l; to carry out tests in altering climates as well as various salt spray and condensation water tests, incl. external storage container for spray solution; test apparatus ready including the interface for connection to the Compact Air Condition Unit Dimensions: Dimensions (inside): approx. 980 x 500 x 820 mm (W x D x H) approx. 220 kg Corrosion Testing Apparatus, Model 618 with test chamber volume 1000 l; to carry out tests in altering climates as well as various salt spray and condensation water tests,...

Compact Air Condition Unit PLUS for cooling the test chamber down to -40 °C Specimen holder for weathering panels for 400 l version - upper test chamber for 400 l version - lower test chamber for 1000 l or 2000 l version - upper test chamber for 1000 l or 2000 l version - lower test chamber Specimen holder grid (lattice spacing 40 x 40 mm) to take up bulky parts for 400 l version - upper test chamber for 400 l version - lower test chamber for 1000 l or 2000 l version - upper test chamber for 1000 l or 2000 l version - lower test chamber For covering the complete test chamber of the 400 l or 1000...

Accessories Figure Wastewater Pumpout Unit for use in wastewater disposal below the flood level, if there is no floor drain available. Water deionizer behropur® B10dN max. flow rate 300 l/h Water deionizer behropur® B22dN max. flow rate 500 l/h For further accessories please refer to our price list no. 618. TBE 618 – IV/2023 The right of technical modifications is reserved

Further Corrosion Test Instruments supplied by ERICHSEN: for humidity tests in accordance with international standards, with a semi-automatic control system or in fully automatic version (519 SA/519 FA) or consisting of a control unit with a separate test chamber (529) in a compact design for acceleration of natural weathering, optional for „dry“ or „wet/dry“ weathering cycles cylindrical or rectangular version, with 400 l or 1000 l test chamber capacity rectangular version, with 400 l or 1000 l test chamber capacity e.g. in accordance with VDA 621 -415 or VW Specification with 400 l, 1000 l...