Corrosion Testing Instruments Model 608 Cyclic Tests Varying Climatic Conditions Automotive Standards Option „dry heat“ Operation via Siemens touch screen Fig.: Control Cabinet 608-1 with test chamber 400 l circular Model 608-2 with 2 test chambers testing equipment for quality management Technical Description Versatile Instruments 2 test chambers operatable with 1 control cabinet Tests in accordance with international standard

Ferrous and non-ferrous metals are attacked continuously by humidity, acids, solutions, gases etc. It is therefore vitally important to choose the correct surface protection. There are many materials and qualities on the market and their properties must be properly assessed. Materials intended to prevent corrosion must be tested if failures are to be avoided. Furthermore the comparative quality control during production is of increasing importance. The best known processes employ spray vapour tests using various salt solutions as well as condensation water climates. Aggressive solutions are turned...

The control cabinet 608-1 is equipped with a PLC (programme logic control) SIEMENS D7 200. The test cycles as well as the test parameters are entered using the SIMATIC touch screen. Cyclic corrosion tests executed e.g. in accordance with the specification of VDA, VW or SWAAT, can be started in a user-friendly manner. By default, five programs for standard test sequences are provided. Program number 6 is available for customized programming. However, programs 1 to 5 can also be customized by the user to meet their specifications. After placing the specimens and the condensation receptacles in...

Control cabinet 608-1, equipped with Siemens touch screen, for connection of an optional ordered test chamber (a subsequent installation of a second test chamber is not possible!) Dimensions: approx. 1000 x 800 x 975 mm (W x D x H) Net weight: approx. 110 kg Control cabinet 608-2, equipped with Siemens touch, screen, for connection of two optional ordered test chambers Dimensions: approx. 1430 x 800 x 975 mm (W x D x H) Net weight: approx. 140 kg Test chamber, circular design, 400 l test chamber volume Dimensions: approx. 1000 x 1100 x 2000 mm (W x D x H - open) Dimensions (inside): approx. 900...

Test Chambers Figure Test chamber, rectangular design, 1000 l test chamber volume Dimensions: approx. 1820 x 1000 x 1900 mm (W x D x H - open) Dimensions (inside): approx. 1500 x 770 x 670 mm (W x D x H) Net weight: Test chamber, rectangular design, 2000 l test chamber volume Dimensions: approx. 3000 x 1000 x 1900 mm (W x D x H - open) Dimensions (inside): approx. 2700 x 770 x 670 mm (W x D x H) Net weight: Specimen Holder for Test Panels to supplement the three holders supplied as standard with the basic apparatus (18 test panels/holder) Specimen Holder for Bulky Parts for holding lager finished...

Accessories Figure Sample Rods (Ø 25 mm) Set per 5 pieces suitable for sample holder rack (Ord.-No. 21700132) Sample Rods (Ø 12 mm) Set per 5 pieces suitable for sample holder rack (Ord.-No. 21700132) Specimen Holder (horizontally) suitable for sample holder rack (Ord.-No. 21700132) (23 test panels /holder) S-Hooks suitable for sample rods (Ø 12 mm) (per 100 pieces) Samples Grid floor grid made of fiberglass with 4 heightadjustable feet, mesh spacing 40 x 40 mm, suitable for test chambers in rectangular design (chamber volume 400 l = 1 grid / chamber volume 1000 l = 2 grid / chamber volume 2000...

Accessories Figure Sample Grid (Ø 115 cm) 2-piece floor grid made of fiberglass for receiving samples, with 6 feet, suitable for test chambers in circular design with 1000 l test volume (1 grid possible) Wastewater Pumpout Unit for use in wastewater disposal below the flood level, if there is no floor drain available Water deionizer behropur® B10dN max. flow rate 300 l/h Water deionizer behropur® B22dN max. flow rate 500 l/h For further accessories please refer to our price list no. 608. TBE 608 – XII/2025 The right of technical modifications is reserve

Further Corrosion Test Instruments supplied by ERICHSEN: Humidity Cabinet HYGROTHERM 519 / 529 for humidity tests in accordance with international standards, with a semi-automatic control system or in fully automatic version (519 /519 Smart) or consisting of a control unit with a separate test chamber (529) Accelerated Weathering Instrument BANDOL WHEEL® 532 in a compact design for acceleration of natural weathering, optional for „dry“ or „wet/dry“ weathering cycles Corrosions Testing Apparatus for Salt Spray and Condensation Water Tests , Model 606 cylindrical or rectangular version, with 400...