Cyclic Tests Corrosion Testing Instruments Varying Climatic Conditions Automotive Standards Operation via Siemens touch screen Fig.: Model 608 Basic with test chamber 1000 l and storage tank testing equipment for quality management Technical Description Tests in accordance with international standard

Purpose and application Ferrous and non-ferrous metals are attacked continuously by humidity, acids, solutions, gases etc. It is therefore vitally important to choose the correct surface protection. There are many materials and qualities on the market and their properties must be properly assessed. Materials intended to prevent corrosion must be tested if failures are to be avoided. Furthermore the comparative quality control during production is of increasing importance. The best known processes employ spray vapour tests using various salt solutions as well as condensation water climates. Test...

• Additional Function “dry heat” Extension of a test chamber in rectangular design with the function “dry heat” up to +70 °C Power supply with function „dry heat“ 400 V / 3~, N, PE 50 Hz with function „dry heat“ 400 V / 3~, N, PE 50 Hz Compressed air connection Air pressure 5 - 7 bar • Multi-channel Data Acquisition and Recording System HOBO UX120 including the required analogue signals for recording the test chamber temperature, humidifier temperature and spray pressure, data logger with 16-bit-resolution, USB interface port, memory for 1.9 million readings; including software for recording,...

Corrosion Testing Apparatus, Model 608/400-Basic, 400 l test chamber volume, with integrated control unit, external storage tank, 3 specimen holder, condensate receptacles and operating manual Test chamber opened approx. 1840 mm (H) Dimensions (inside): approx. 780 x 770 x 670 mm (W x D x H) External storage tank: approx. 900 x 615 x 870 mm (W x D x H) 29970031 Corrosion Testing Apparatus, Model 608/1000-Basic, 1000 l test chamber volume, with integrated control unit, external storage tank, 3 specimen holder, condensate receptacles and operating manual Test chamber opened approx. 1840 mm (H)...

For further accessories please refer to our price list no. 608 Basic The right of technical modifications is reserved.

Further Corrosion Test Instruments supplied by ERICHSEN: Humidity Cabinet HYGROTHERM 519 / 519 Smart / 529 for humidity tests in accordance with international standards, with a semi-automatic control system or in fully automatic version (519/519 Smart) or consisting of a control unit with a separate test chamber (529) Accelerated Weathering Instrument BANDOL WHEEL® 532 in a compact design for acceleration of natural weathering, optional for „dry“ or „wet/dry“ weathering cycles Corrosions Testing Apparatus for Salt Spray and Condensation Water Tests , Model 606 cylindrical or rectangular version,...

Scratching Tool acc. to van Laar, Model 426 Automatic Milling Machine CORROCUTTER Smart 638 Test Panel Scratcher CORROCUTTER 639 Scratch Stylus acc. to Sikkens, Model 463 // Model 463-Pro Multi-Cross Cutter, Model 295/MI Postfach 1264 I 58652 Hemer I Germany I Tel.+49(0)2372-9683-0 I Fax+49(0)2372-6430 I www.erichsen.de I [email protected]