Corrosion Testing Instruments Model 606 Salt Spray Test Intermittent Testing Condensation Water Tests Operation via JUMO DICON touch Model 606-2 with 2 test chambers 1000 l circular Fig.: Control Cabinet 606-1 with test chamber 400 l circular testing equipment for quality management Technical Description Versatile Instruments 2 test chambers operatable with 1 control cabinet Tests in accordance with international standards

Ferrous and non-ferrous metals are attacked continuously by humidity, acids, solutions, gases etc. It is therefore vitally important to choose the correct surface protection. There are many materials and qualities on the market and their properties must be properly assessed. Materials intended to prevent corrosion must be tested if failures are to be avoided. Furthermore the comparative quality control during production is of increasing importance. The best known processes employ spray vapour tests using various salt solutions as well as condensation water climates. Aggressive solutions are turned...

Power supply 400 l test chamber 1000 l test chamber 2000 l test chamber The control cabinet 606-1 is equipped with a JUMO DICON touch for easy operation and monitoring of the test equipment as well as the necessary regulating and control instruments for monitoring the chamber temperature, the temperature of the humidifier, the The scope of supply includes an equipment for tests in heat damp atmospheres according to DIN EN ISO 6270-2 (CH) as well as two condensate receptacles. The top of the test chamber dome is pneumatically opened and closed so that both hands can be used to lodge the specimens....

Control cabinet 606-1, equipped with JUMO DICON touch, for connection of an optional ordered test chamber (a subsequent installation of a second test chamber is not possible!) Dimensions: approx. 1000 x 800 x 975 mm (W x D x H) Net weight: approx. 110 kg Control cabinet 606-2, equipped with JUMO DICON touch, for connection of two optional ordered test chambers Dimensions: approx. 1430 x 800 x 975 mm (W x D x H) Net weight: approx. 140 kg Test chamber, circular design, 400 l test chamber volume Dimensions: approx. 1000 x 1100 x 2000 mm (W x D x H - open) Dimensions (inside): approx. 900 mm 0 x...

Test Chambers Figure Test chamber, rectangular design, 1000 l test chamber volume Dimensions: approx. 1820 x 1000 x 1900 mm (W x D x H - open) Dimensions (inside): approx. 1500 x 770 x 670 mm (W x D x H) Net weight: Test chamber, rectangular design, 2000 l test chamber volume Dimensions: approx. 3000 x 1000 x 1900 mm (W x D x H - open) Dimensions (inside): approx. 2700 x 770 x 670 mm (W x D x H) Net weight: Specimen Holder for Test Panels to supplement the three holders supplied as standard with the basic apparatus (18 test panels/holder) Specimen Holder for Bulky Parts for holding lager finished...

Accessories Figure Sample Rods (Ø 25 mm) Set per 5 pieces suitable for sample holder rack (Ord.-No. 21700132) Sample Rods (Ø 12 mm) Set per 5 pieces suitable for sample holder rack (Ord.-No. 21700132) Specimen Holder (horizontally) suitable for sample holder rack (Ord.-No. 21700132) (23 test panels /holder) S-Hooks suitable for sample rods (Ø 12 mm) (per 100 pieces) Samples Grid floor grid made of fiberglass with 4 heightadjustable feet, mesh spacing 40 x 40 mm, suitable for test chambers in rectangular design (chamber volume 400 l = 1 grid / chamber volume 1000 l = 2 grid / chamber volume 2000...

Accessories Figure Sample Grid (Ø 115 cm) 2-piece floor grid made of fiberglass for receiving samples, with 6 feet, suitable for test chambers in circular design with 1000 l test volume (1 grid possible) Wastewater Pumpout Unit for use in wastewater disposal below the flood level, if there is no floor drain available Water deionizer behropur® B10dN max. flow rate 300 l/h Water deionizer behropur® B22dN max. flow rate 500 l/h The right of technical modifications is reserved. TBE 606 – VIII/20

Further Corrosion Test Instruments supplied by ERICHSEN: for humidity tests in accordance with international standards, with a semi-automatic control system or in fully automatic version (519/519 Smart) or consisting of a control unit with a separate test chamber (529) in a compact design for acceleration of natural weathering, optional for „dry“ or „wet/dry“ weathering cycles rectangular version, with 400 l, 1000 l or 2000 l test chamber capacity e.g. in accordance with VDA 621-415 or VW Specification ectangular version, with 400 l, 1000 l or 2000 l test chamber capacity e.g. in accordance with...