Corrosion Testing Testing Instrument Model 606-Basic, 1000 l/2000 l – with external storage tank testing equipment for quality management Technical Description Salt Spray Tests and Condensation Water Tests Tests in accordance with international standards

Purpose and application Ferrous and non-ferrous metals are attacked continuously by humidity, acids, solutions, gases etc. It is therefore vitally important to choose the correct surface protection. There are many materials and qualities on the market and their properties must be properly assessed. Materials intended to prevent corrosion must be tested if failures are to be avoided. Furthermore the comparative quality control during production is of increasing importance. The best known processes employ spray vapour tests using various salt solutions as well as condensation water climates. Control...

Ordering Information Figure Description Corrosion Testing Apparatus, Model 606/300-Basic, 300 l test chamber volume, with integrated control unit and storage tank, 7 sample rods, 100 S-hooks, 2 condensate receptacles and operating manual Dimensions Test Chamber: approx.. 760 x 540 x 1060 mm (W x D x H) Test chamber inside: approx. 700 x 500 x 770 mm (W x D x H) Control unit approx. 760 x 540 x 800 mm (W x D x H) Net weight: approx. 200 kg Corrosion Testing Apparatus, Model 606/400-Basic, 400 l test chamber volume, with integrated control unit, external storage tank, 3 specimen holder, condensate...

Sample Holder Rack (height-adjustable) for test chamber in rectangular design; without sample rods and S-hooks (chamber volume 400 l = 1 rack / chamber volume 1000 l = 2 racks / chamber volume 2000 l = 4 racks) suitable for sample holder rack (Ord.-No. 21700132) suitable for sample holder rack (Ord.-No. 21700132) S-hooks suitable for sample rod (0 12 mm) Specimen Holder (horizontally) suitable for sample holder rack (Ord.-No. 21700132) (for 23 test panels per holder) 23520232 Specimen Holder for Test Panels (for 12 test panels per holder) floor grid made of fiberglass with 4 feet, mesh spacing...