- Catalogs
- ERICHSEN GmbH & Co. KG
- Technical Description Model 416
Technical Description Model 416
1 / 2 PagesView full catalog
Technical Description Model 416
Product catalog summary
Through-Dry Tester, Model 416
Purpose and Application
This instrument is designed to test the through-dry state of paints, lacquers, and similar coatings in compliance with ISO 9117 and EN 29117 standards.
Principle of Test
A nylon fabric-faced test plunger, loaded with a defined weight, is lowered onto the test surface for a set time and then rotated 90°. The effect on the coating is evaluated after lifting the plunger.
Design and Function
The instrument includes a specimen table with a support stand guiding a loaded weight vertically. The test plunger, connected via a ball-and-socket joint, weighs 1500 g. A rubber sheet and monofil nylon fabric are attached to the test head. The instrument must be leveled horizontally using the supplied box level. After a defined drying time, the test head is lowered, turned 90° after 10 seconds, and lifted after another 2 seconds. If no damage is observed, the through-dry state is achieved; otherwise, the test is repeated.
Technical Data
- Dimensions: Length: approx. 150 mm, Width: approx. 300 mm, Height: approx. 305 mm
- Weight, nett: approx. 4.5 kg
Ordering Information
Order No. 0185.01.31 - Through-Dry Tester, Model 416
The supply includes a box level and 100 pieces of nylon fabrics (100 x 100 mm). Technical modifications are reserved.
See more
Catalog excerpts
testing equipment for quality management
Open the catalog to page 1
Purpose and Application This instrument is designed for testing the through-dry state of paints, lacquers and similar coatings in accordance with the standards ISO 9117and EN 29117. A test plunger faced with nylon fabric and loaded with a defined weight is lowered onto the test surface for a limited period of time and then turned through 90°. The resulting effect on the coating is evaluated after lifting the test plunger. The testing instrument consists of a specimen table holding a support stand that guides a loaded weight vertically. A test plunger is connected to the loaded weight via a ball-and-socket...
Open the catalog to page 2All ERICHSEN GmbH & Co. KG catalogs and technical brochures
Technical Description Model 14612 Pages
Technical Description Model 14512 Pages
Technical Description Model 14211 Pages
Technical Description Model 2958 Pages
Related Searches
- Kiln
- ERICHSEN testing machine
- Force sensor
- Measuring device
- ERICHSEN test chamber
- Electric furnace
- Test stand
- Tension/compression force transducer
- ERICHSEN temperature test chamber
- Steel load cell
- ERICHSEN material testing machine
- ERICHSEN automatic testing machine
- Strain gauge force sensor
- ERICHSEN hardness tester
- ERICHSEN climate chamber
- ERICHSEN quality control test chamber
- Computer-controlled test machine
- Stainless steel force transducer
- ERICHSEN portable tester
- ERICHSEN humidity test chamber
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.