Cross Hatch Cutters Models 295 Cross Hatch Cutter with free turnable axle SCROLLRULER adjustable Cross Cut Ruler Folding Ruler Models 295/XIV and 295/I with cutting head and folding ruler Folding Ruler with handle testing equipment for quality management Technical Description and Operating Instructions Low-priced Hand Instrument High Economic Efficiency caused by four independent Cutting Edges Cross Cutting Tests Materials

SAFTY INSTRUCTIONS Proper use The Model 295 is intended only for adhesion tests by carrying out the cross-cut test in accordance with the international standards. The Cross Hatch Cutter is a purely mechanical instrument. The blades of the cross cutters are very sharp edged and therefore may cause injuries, if the instrument is not handled correctly and carefully! To the versions I, II and VII of Models 295 the cutting head used in each case is mounted in a hand grip in a fixed manner. Because they are, during the test procedure, moved manually over the surface to be tested, the pressure exerted...

In the case of the single cut instruments, Models 295/III, XII and XIII a folding ruler is also included. There are three versions of folding rulers available: • for Mod. 295/III: with 10 swivel-mounted folding rulers of 1 mm and 1.5 mm thickness each (1.5 mm = acc. to Daimler-Benz) • for Mod. 295/XIII: with 5 swivel-mounted folding rulers of 1 mm/2 mm/3 mm thickness each. The basic principle is to cut through the coating with a series of several cuts at right angles in a defined manner. The square pattern that is obtained can be evaluated visually by examining the way in which the coating has...

Order Information Figure Single Edge Cutting Device 295/XII with Folding Ruler with 10 swivel-mounted folding rulers of 1 mm and 1,5 mm thickness each, incl. magnifying glass, polyamide bristle brush and plastic case Single Edge Cutting Device 295/XIII with Folding Ruler egonomically optimized, triangular version with handle and 5 swivel-mounted folding rulers of 1 mm, 2 mm and 3 mm thickness each, incl. magnifying glass, polyamide bristle brush and plastic case SCROLLRULER 295/XV, universal cross cut ruler, scaled cutting distances (6 x 1 mm, 6 x 2 mm, 6 x 3 mm, 11 x 1 mm and 11 x 1,5 mm) adjusted...

Order Information Figure Cutter 295/I and holder, with 6 edges, cutting distance 1 mm, incl. tubular plastic case, without Manufacturer’s Test Certificate M Cutter 295/II and holder, with 6 edges, cutting distance 2 mm, incl. tubular plastic case, without Manufacturer’s Test Certificate M Cutter 295/V and holder, with 11 edges, cutting distance 1 mm, incl. tubular plastic case, without Manufacturer’s Test Certificate M Folding Ruler with 10 swivel-mounted folding rulers of 1 mm each as supplied with model 295/III, without Manufacturer’s Test Certificate M Folding Ruler with 10 swivel-mounted...

Reference Class: Most versions of Model 295 (without 295/XIV, 295/XV) are supplied with a Manufacturer’s Certificate M in accordance with DIN 55 350-18 that includes among others the following information: Spacing between the outer cutting edges (at Multi-Cross Cutter), angle of cutting edge, cutting edge, deviation between the cutting edges (at Multi-Cross Cutter), product identification, test equipments used and their calibration results, date, name of inspector. When checking the cross cutting knife-edges, a contour measuring instrument is used to determine, across the cutting direction, the...

Please also request our literature for the CrossScan 295 XVI. The Automatic Cross Hatch Cut Rating System with evaluation software determines the percentage (coating) material loss in the defined area of the cross hatch pattern and automatically assigns the corresponding cross hatch characteristic according to the standard.