Flow Cups Models 243 testing equipment for quality management Technical Description and Operating Instructions A Simple Method to Measure Viscosity

Viscosity Cups remain the most important quick and simple method to measure the consistency of fluids in the laboratory and in production. Viscosity Cups are, however, only suitable for lower viscosities and not for highly viscous substances such as pastes, etc.. The most accurate results are achieved with fluids within the range complying with Newton’s Law. Viscosity Cups consist of a hollow cylinder which terminate in a nozzle in the bottom. Excess fluid is collected in a gutter channel. In general, the Viscosity Cups are made of anodised aluminium and the nozzles of stainless steel. Only the...

MODEL No. (Material) STANDARD 243/I (Phenol resin) NOZZLE dia/No. * The ASTM D 1200 Standard stipulates a maximum allowed flow time tolerance of ± 10%. Each model 243/III is always manufactured within a maximum flow time tolerance of ± 6.5%! Three legged stand suitable for all flow cups listed, with spirit level. Scale 0 - 50°C, read off accuracy 0.2°C. with calibration certificate; LCD, indication range: 9 hours, 59 minutes, 59,99 seconds; height of digits: 8 mm, two-button operation. Opto-electronic measuring instrument for the exact determination of the flow time using standardised flow cups....

Product Name Nozzle Dia. Order No. Remarks Model 243/I Model 243/I Model 243/I Model 243/I Model 243/I Model 243/II Model 243/II Model 243/II Model 243/II 4 mm 0064.02.31 of Anodised Aluminium with Manufacturer’s Test Certificate M 0249.01.32 with official Test Certificate issued by DKD Temperature jacket Model 243/III Model 243/III Model 243/III Model 243/III 0060.01.31 with Manufacturer’s Test Certificate M Temperature jacket Model 243/VII Model 243/VII Model 243/VII Model 243/VII 5 mm 0061.04.31 with Manufacturer’s Test Certificate M Model 243/VII Model 243/VII Model 243/VII Model 243/VII...