Cupping and Deep Drawing Cup Test Machine, Model 242-Basic testing equipment for quality management

Fully automatic cupping and deep drawing cup test machine for testing the ductility of coated, ferrous and non-ferrous metals (e.g. coil coatings, lacquered, plastic coated or electroplated materials). The testing machine is provided with an electro-hydraulic drive and a maximum drawing force of 200 kN. The clear arranged menu navigation via the touch panel (99 freely programmable programs and tool changes) has password-protected levels, which protect against unauthorized access. • The sturdy construction and hydraulic operation ensure a wear-resistant functioning of the machine so that high...

valid for Clearance ratio Selection table for drawing dies B1/C2 (#01370132) valid for aluminium and aluminium aloy Norm: DIN EN 1669 valid for Clearance ratio

Selection table for drawing dies B2/C3 (#01430132) valid for ferritic and non-ferritic material (material tvoe necessary for order) Norm: ERICHSEN

Blanking tool for deep-drawing cups blank cut with punch dia 33 mm (B1):- consists of blanking die ring (# 01380132) and blanking punch (01390132) for ferritic material: Punching areas for sheet thicknesses of ferritic materials: Punching areas for sheet thicknesses of non-ferritic materials:

- Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferritic materials: Punching areas for sheet thicknesses of non-ferritic materials: Wiper ring (# 30720032) for a specific punching area: Postfach 1264 I 58652 Hemer I Germany I Tel.+49(0)2372-9683-0 I Fax+49(0)2372-6430 I www.erichsen.de I [email protected]