Cupping and Deep-Drawing Cup Test Machine, Model 212 testing equipment for quality management Technical Description ERICHSEN Cupping Test

Fully automatic cupping and deep-drawing cup test machine for testing the ductility of coated, ferrous and non-ferrous metals (e.g. stamping paints, lacquered, plastic coated or electroplated materials). The testing machine is provided with an electro-hydraulic drive and a maximum drawing force of 120 kN. The machine is operated via a resistive touch panel. The operation is simplified by the user-friendly menu navigation. Main and emergency Off switches are located next to the touch panel. The setting of sheet holding force and forming speed is carried out by ergonomically placed control buttons...

valid for Clearance ratio Selection table for drawing dies B1/C2 (#01370132) valid for aluminium and aluminium aloy Norm: DIN EN 1669

Selection table for drawing dies square cups 26x26 (#01720132) valid for ferritic and non-ferritic material (material tvoe nessarv for order) Norm: ERICHSEN

- consists of blanking die ring (# 01380132) and blanking punch (01390132): Blanking tool for deep-drawing cups blank cut with punch dia 33 mm (B1): - Square cups 26 x 26 mm approx. 60 mm (# 05030132) Punching areas for sheet thicknesses of ferritic materials: Punching areas for sheet thicknesses of non-ferritic materials: Postfach 1264 I 58652 Hemer I Germany I Tel.+49(0)2372-9683-0 I Fax+49(0)2372-6430 I www.erichsen.de I [email protected]