Universal Sheet Metal Testing Machine Model 146 Maximum Strain Deep Drawing Cup Test Square Deep Drawing Cup Test Software for Control, Adjustment, Documentation and Filing of Measuring Data testing equipment for quality management Technical Description NAKAJIMATest MARCINIAK-Test Bulge-Test High Speed Test standardized Tools / Accessories

The special feature of Models 146-60 and 146-100 is the increased drawing speed of the drawing punch which, in addition to the normal drawing speed range of 0 - 1200 mm/min can be adjusted, in an infinitely variable manner and independent of load, up to 3000 mm/min. This is achieved by using a separate oil circuit, fed by a pump with high volumetric displacement. Contrary to the high speed attachment based on a nitrogen accumulator, here a constant drawing speed behaviour is guaranteed over the total displacement of 150 mm. As to the technical design and the options available, including PC control...

Hydraulically lifted test head Hydraulic test head lifting function (Fig. 1) ensures a high rate of working safety and facilitates convenient testing due to the fact that the test head is hydraulically opened and closed. Accessories (Options) Hot Drawing Equipment up to 550 °C A further valuable addition to the possibilities offered by Model 146 is provided by the additional hot drawing equipment (Fig.2). In this, the blankholder and drawing die are heated in an insulated container and special provision is made to enable these then to be set up without difficulty on the machine. An electronic...

Universal User Software SmartControl with PC The software enables the control, adjustment, documentation and filing of measuring data of the testing machine. Software for recording of forcedisplacement diagrams such as drawing force and blank holder force, stroke. Creation of scripts (test sequences); presetting of freely selectable parameters such as drawing and blank holder force as well as drawing speed. Via SPS drawing force, blank holder force and stroke are acquired. The connection is made by an Ethernet connection. This programme enables to create and evaluate test sequences for tests...

Selection table for drawing dies B2/C3 (#01430132) valid for aluminium and aluminium aloy Selection table for drawing dies B2/C3 (##01430132) valid for ferrous and non-ferrous material (material tvoe necessary for order)

Selection table for drawing dies B4 (#03980132) valid for ferrous and non-ferrous material (material tvoe necessary for order) Norm: ERICHSEN

Selection table for blanking die ring (#08690132) valid for ferrous and non-ferrous material Selection table for drawing dies for square cups 40x40 (#01530132) valid for ferrous and non-ferrous material (material type necessary for order) Norm: ERICHSEN

Blanking tool for deep-drawing cups blank cut with punch dia 33 mm (B1): - consists of blanking die ring (# 01380132) and blanking punch (01390132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: - consists of blanking die ring (# 01440132) and blanking punch (01450132) - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials:

- consists of blanking die ring (# 01490132) and blanking punch (01500132) - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: - consists of blanking die ring (# 01490132) and blanking punch (01500132) - Square cups 70 x 70 approx. 130 mm (blanking punch # 04200132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials:

Electro-hydraulically driven Sheet Metal Testing Machine with Automatic Controls - Model 134 (drawing force 120 kN) Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 142-Basic (drawing force 200 kN or 400 kN) - compact design Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 142 (drawing force 200 kN or 400 kN) Universal Sheet Metal Testing Machine with AutomaticTest Sequence - Model 145-60-Basic (drawing force 600 kN) - compact design Universal Sheet Metal Testing Machine for Research and Development - Model 146 (drawing force 600 kN or_1000...