Universal Sheet Metal Testing Machine Model 145 Maximum Strain Deep Drawing Cup Test Square Deep Drawing Cup Test Software for Control, Adjustment, Documentation and Filing of Measuring Data testing equipment for quality management Technical Description Tools / Accessories electro-hydraulic Drive Bulge Test

The Models 145-60 and 145-100 belongs to the top-of-the-line models of our sheet metal testing machines. Depending on the demand, there are two versions available: with a drawing force of 600 kN or 1000 kN, including an increased blanking force and blank holder holder force for blank diameters up to 220 mm. The testing machines are equipped with electro-hydraulic drive, fully automatic test sequence and switch-off at specimen failure. This Sheet Metal Testing Machine is not only ideal for the effortless, quick and accurately all important and known-deep drawing tests for ferrous and non-ferrous...

Hydraulically lifted test head Hydraulic test head lifting function (Fig. 1) ensures a high rate of working safety and facilitates convenient testing due to the fact that the test head is hydraulically opened and closed. Accessories (Option) Hot Drawing Equipment up to 550 °C A further valuable addition to the possibilities offered by Model 145 is provided by the additional hot drawing equipment (Fig.2). In this, the blank holder and drawing die are heated in an insulated container and special provision is made to enable these then to be set up without difficulty on the machine. An electronic...

Universal User Software SmartControl with PC The software enables the control, adjustment, documentation and filing of measuring data of the testing machine. Software for recording of force-displacement diagrams such as drawing force and blank holder force, stroke. Creation of scripts (test sequences); presetting of freely selectable parameters such as drawing and blank holder force as well as drawing speed. Via PLC drawing force, blank holder force and stroke are acquired. The connection is made by an Ethernet connection. This programme enables to create and evaluate test sequences for tests...

Selection table for drawing dies B2/C3 (#01430132) valid for aluminium and aluminium aloy Selection table for drawing dies B2/C3 (##01430132) valid for ferrous and non-ferrous material (material tvoe necessary for order)

Selection table for drawing dies B4 (#03980132) valid for ferrous and non-ferrous material (material tvoe necessary for order) Norm: ERICHSEN

Blanking tool for deep-drawing cups blank cut with punch dia 33 mm (B1): - consists of blanking die ring (# 01380132) and blanking punch (01390132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: - consists of blanking die ring (# 01440132) and blanking punch (01450132) - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials:

- consists of blanking die ring (# 01490132) and blanking punch (01500132) - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: - consists of blanking die ring (# 01490132) and blanking punch (01500132) - Square cups 70 x 70 approx. 130 mm (blanking punch # 04200132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: Wiper ring (# 30730032) for a specific punching area Wiper ring (# 30740032)...

Electro-hydraulically driven Sheet Metal Testing Machine with Automatic Controls - Model 134 (drawing force 120 kN) Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 142-Basic (drawing force 200 kN or 400 kN) - compact design Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 142 (drawing force 200 kN or 400 kN) Universal Sheet Metal Testing Machine with AutomaticTest Sequence - Model 145-60-Basic (drawing force 600 kN) - compact design Universal Sheet Metal Testing Machine for Research,Development and In-process Testing Model 146 Postfach 1264...