Universal Sheet Metal Testing Machine Model 142 Bore Expanding ISO 16630 Deep Drawing Cup Test Square Deep Drawing Cup Test Option: HEXRASCAN and insertion device testing equipment for quality management Technical Description electro-hydraulic Drive Programme Logic Control

Universal Sheet Metal Testing Machine with electrohydraulic drive, fully automatic test sequence and switch off at specimen failure, max. drawing forces 200 kN or 400 kN - Model 142-20 and Model 142-40. All components are easily accessible from outside the machine, and thus the tools for the individual tests can be changed quickly, too. The clear arranged menu navigation via the touch panel (99 freely programmable programs and tool changes) has password-protected levels, which protect against unauthorized access. Application This Testing Machine can be used not only to perform effortlessly, quickly...

Blank diameter PC and Software Package A special software programme has been developed for the modified ERICHSEN cupping test. The signals for the drawing punch stroke, the drawing force and the blankholder force can also be transmitted to a PC. A force/displacement diagram appears on the VDU. For conducting the Deep Drawing Cup Test, for example in accordance with DIN 50 155, a special software pack is available producing a force/ displacement diagram over the full forming range as well as numerical results for drawing punch stroke, drawing force and blankholder force. A further valuable addition...

For the modified ERICHSEN Cupping Test the user can search between two versions of user test software: The ERICHSEN Cupping Test (in accordance with EN ISO 20482, and corresponding to national and international standards) is a test providing simple and quick means of assessing the multi-axis ductility of sheet and strip using a procedure that relates closely to practical processes. The depth range reached at failure is, however, only an initial guide to the evaluation of the forming properties of the sheet metal. The Universal Sheet Testing Machine, Model 142, (as is the case with all the modern...

Selection table for drawing dies B2/C3 (#01430132) valid for ferrous and non-ferrous material (material tvoe necessary for order) Norm: ERICHSEN

Selection table for drawing dies B2/C3 (##01430132) valid for ferrous and non-ferrous material (material tvoe necessary for order) Selection table for drawing dies B3/C4 (#01480132) valid for ferrous and non-ferrous material (material tvoe necessary for order) Norm: ERICHSEN

Blanking tool for deep-drawing cups blank cut with punch dia 33 mm (B1): Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: Blanking tool for deep-drawing cups blank cut with punch dia 50 mm (B2): - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials:

- consists of blanking die ring (# 01490132) and blanking punch (01500132) - Square cups 40 x 40 approx. 85 mm (blanking punch # 04190132) Punching areas for sheet thicknesses of ferrous materials: Punching areas for sheet thicknesses of non-ferrous materials: Wiper ring (# 30720032) for a specific punching area: Wiper ring (# 30730032) for a specific punching area

Electro-hydraulically driven Sheet Metal Testing Machine with Automatic Controls - Model 134 (drawing force 120 kN) Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 142-Basic (drawing force 200 kN or 400 kN) - compact design Universal Sheet Metal Testing Machine with Automatic Test Sequence - Model 145-60-Basic (drawing force 600 kN) - compact design Universal Sheet Metal Testing Machine for Research and Development - Model 145 (drawing force 600 kN or_1000 kN) Universal Sheet Metal Testing Machine for Research, Development and In-process Testing - Model 146 (drawing...