applications_irrigation
8Pages

{{requestButtons}}

Catalog excerpts

applications_irrigation - 3

The constant irrigation of large agricultural areas is of immense importance for feeding the world’s population. One of mankind’s oldest technical applications are the irrigation of fields for agriculture. This allowed the first advanced civilisations to flourish along the Nile, Euphrates and Tigris and is still today a decisive factor in feeding the growing world population. Of great importance here is that the valuable commodity water is used economically, but also that sufficient irrigation takes place for plant growth. Equally important is the transportation of the water to the...

Open the catalog to page 3
applications_irrigation - 4

The TALIS product range for irrigation Resilient-seated gate valves As the latest generation of gate valves, the TALIS BAKIO® gate valve offers a lot of advantages, such as an insert-type stem bearing enabling seamless bonnet coating for complete corrosion protection and sealing of the spindle bearing with o-rings which can be replaced under full working pressure if required. An integrated spindle screw end stop guarantees increased safety and the innovative protective cap with integrated sealing lips serves as a secure sealing against dust and moisture. The shut-off wedge made from...

Open the catalog to page 4
applications_irrigation - 5

Centric butterfly valves The perfected BELGICAST ECLI butterfly valve is a butterfly valve of centric design and compact face-to-face dimension being used in cases where lug and wafer type valves are needed. The sophisticated design guarantees perfect leak tightness and a long service life: • Replaceable elastomer body seat ring, safe against mechanical and hydrodynamical strains • Anchoring of the seat ring in the body to avoid any displacements when retracting the valve disc • Positive and frictional disc / shaft connection for functionally safe connection without fluttering •...

Open the catalog to page 5
applications_irrigation - 6

A special version of the tried and tested RAPHAEL RAF pressure reducing valve is the RAPHAEL RAF-P with a body made of glass fibre reinforced plastic which makes the valve significantly lighter with the same stability as a metal body. The material avoids the risk of corrosion even in the most challenging installation positions. It is available in many sizes from 1.5” to 5”. A low head loss and high flow rates enable a high efficiency. It can be used for remote operation of hydraulic valves by an electric command and for irrigation, water distribution and field control. Hydrants An...

Open the catalog to page 6
applications_irrigation - 7

References Bringing water to the farmers – irrigation in Turkey A pressurized irrigation network which takes water from the lake behind the Atatürk Dam was installed in Turkey to irrigate 8,669 ha of land through pressurized sprinkle and drip irrigation systems. The project includes 240 km of pipes with diameters of 160 to 200 cm, three reservoirs with the total capacity of 435,615 m³ and 4,068 m of main canal with a trapezoidal cross section. BELGICAST supplied butterfly valves and gate valves, BAYARD was in charge of air valves. ­ ELGICAST experts also assisted the contractor during the...

Open the catalog to page 7
applications_irrigation - 8

Your Choice in Waterflow Control TALIS is always the number one choice whenever water transport or control is required. TALIS has the best solution for water and energy management, as well as for industry and municipal applications. With a varied range of products we offer comprehensive solutions for the entire water cycle. From hydrants to butterfly valves. From the knife-gate valves to the needle valves. Our experience, innovative technology, global expertise and individual consultation process form the basis for developing sustainable solutions for the efficient TALIS Management Holding...

Open the catalog to page 8

All ERHARD catalogs and technical brochures