Slim and versatile The slimline design of the system ST gives it a sophisticated look. It can be used for light assembly tables and assembly systems. The assembly grooves on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The leg ST consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has its own motor to drive the threaded spindles. These are driven synchronously by the control unit. The ST is available as a lifting system (legs and control unit) or as a complete...

Technical data - Table leg for flexible use with sliding guide - Load: - 1 leg: 2000 N (440 lbs) - 2 legs: 4000 N (880 lbs) - 3 legs: 4000 N (880 lbs) - Synchronous control of 2 or 3 table legs - Lifting speed 12 mm/s - Synchronisation of up to 4 control units possible (maximum of 12 legs) - Lifting distance 300 mm (12") or 400 mm (16") - Max. static bending moment Mb = 1500 Nm - Max. dynamic bending moment Mbdyn = 150 Nm - Colour: plain anodised aluminium Detailed CAD drawings in various formats can be found at www.ergoswiss.com

Our systems SL and ST are designed for the fast and flexible assembly of tables. The SL/ST-2 base frame consists of 2 legs, a crossbar and 2 table feet. The maximum load is 4000 N (880 lbs). The adjustment range is 400 mm (16") and the lifting speed 12 mm/s. The crossbars slide easily into the grooves of the table legs and are clamped with an Allen key. Both legs are connected to the synchronous control system by means of a plug-in connector and are immediately ready for operative use. Various screws to mount the table top are included in delivery. The base frame is delivered unassembled. Assembly...

Detailed CAD drawings in various formats can be found at www.ergoswiss.com