Catalog excerpts
Elegant and compact The system SL can be used for assembly tables, in assembly units, for office desks, height-adjustable beds, for baths and generally in furniture and machine construction. The assembly grooves on 3 sides (width 8 mm) allow the attachment of crossbars, shelves, attachments and mountings along the entire length of the leg. The leg SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. The SL is available as a...
Open the catalog to page 2Technical data - Table leg for flexible use with internal drive unit and sliding guides - Load: - 1 leg: 2000 N (440 lbs) - 2 legs: 4000 N (880 lbs) - 3 legs: 4000 N (880 lbs) - Synchronous control of 2 or 3 table legs - Lifting speed 12 mm/s - Synchronisation of up to 4 control units possible (maximum of 12 legs) - Lifting distance 300 mm (12") or 400 mm (16") - Max. static bending moment Mb = 2000 Nm - Max. dynamic bending moment Mbdyn = 200 Nm - Colour: plain anodised aluminium Detailed CAD drawings in various formats can be found at www.ergoswiss.com
Open the catalog to page 3Our systems SL and ST are designed for the fast and flexible assembly of tables. The SL/ST-2 base frame consists of 2 legs, a crossbar and 2 table feet. The maximum load is 4000 N (880 lbs). The adjustment range is 400 mm (16") and the lifting speed 12 mm/s. The crossbars slide easily into the grooves of the table legs and are clamped with an Allen key. Both legs are connected to the synchronous control system by means of a plug-in connector and are immediately ready for operative use. Various screws to mount the table top are included in delivery. The base frame is delivered unassembled....
Open the catalog to page 4Detailed CAD drawings in various formats can be found at www.ergoswiss.com
Open the catalog to page 5All ErgoSwiss catalogs and technical brochures
-
Base frameSE
2 Pages
-
Base frameSE
2 Pages
-
Lifting columnSL
2 Pages
-
Base frameSM
2 Pages
-
TABLE BASE FC 650 3.0
1 Pages
-
Base frame TU
2 Pages
-
Base frame TT
2 Pages
-
Base frame TQ
2 Pages
-
Base Frame TA
2 Pages
-
Micro Hydraulics
48 Pages
-
Spindle Lifting Systems
32 Pages
-
FB / FC series
2 Pages
-
ST series
5 Pages
-
TL series
1 Pages
-
General Catalogue
48 Pages
-
Fast and quiet
2 Pages
-
Comfortably driven
2 Pages
-
Compact power packs
2 Pages
Archived catalogs
-
Quick Ship Systems
2 Pages
-
Complete product catalogue
24 Pages
-
System selection guide
1 Pages