Catalogs >
ErgoSwiss >
Lifting columnSL

Lifting columnSL
1 / 2Pages

Catalog excerpts

Lifting column The lifting column SL consists of two colourless anodised aluminium profiles, guided by plastic gliders. Each lifting column has an internal motor that drives a threaded spindle. The cable length is 1.8 metres. The SL is available as a lifting system (lifting column and control unit) or as a complete base frame. The T-slots on 3 sides (width 8 mm) of the lifting column allow the addition of crossbars, shelves, attachments and mountings. Up to 3 lifting columns can be connected to one control unit. When a maximum of 4 control units are synchronised, up to 12 lifting columns can be operated synchronously. The choice of system load defines the type of control unit (see system combination). The system SL can be used for assembly tables, in assembly units, for office desks, height-adjustable beds and bathtubs and for general use in furniture construction and mechanical engineering. The following accessories are available: - telescopic crossbar - able feet with adjustable rubber feet t - base plates - ption: ESD (electrostatic discharge) version o

Open the catalog to page 1

Technical data - Versatile lifting column with internal drive unit - System loads: - 1 SL: 2000 N - 2 SL: 4000 N (6000 N) - 3 SL: 4000 N (7500 N) - 4 SL: (10000 N) - Synchronous control of 1 to 12 (8) lifting columns - Lifting speed 12 mm/s (8.5 mm/s)*** - Stroke length 300 or 400 mm - Mbx stat. = 450 Nm* Mby stat. = 1200 Nm* - Mbx dyn. = 200 Nm** Mby dyn. = 550 Nm** - Colour: colourless anodised aluminium * stat. = max. permissible Mb bending moment at a standstill M ** b dyn. = max. permissible bending moment during lifting movement L *** ifting speed load dependent Detailed CAD drawings...

Open the catalog to page 2