Base frame  Combinable in a variety of ways The base frame SM-1 consists of a lifting column mounted on a table foot with adjustable feet. The lifting column SM is equipped with a table plate support which is used to attach a table top. - ncluding 1 control box and 1 manual i control switch - deal as a lectern i - System load 200 kg (12 mm/s) The base frame SM-2 consists of two lifting columns each of which is mounted on a table foot with adjustable feet. The columns are connected by a crossbar. Each lifting column SM is equipped with a table plate support which is used to attach the table top. - ncluding 1 control box and 1 i manual control switch - deal as an office desk or light i assembly table - System load 400 kg (12 mm/s) The base frame SM-4 consists of four lifting columns arranged in a rectangle and connected by crossbars. The lifting columns are equipped with a foot plate including adjustable rubber feet. The table top is attached directly to the adapter plates of the lifting column SM. - ncluding 1 control box and 1 i manual control switch - deal for stable workbenches i - ystem loads up to 1000 kg ( 8.5 mm/s) s on request Assembly and operating instructions are included with every delivery. They can also be downloaded from www.ergoswiss.com. 18

Dimensions of base frame Base frame  Detailed CAD drawings in various formats can be found at www.ergoswiss.com As option available: - Installation 564 mm (Stroke length 300 mm) You can also buy the SM base frame directly from our Online Shop! Detailed CAD drawings in various formats can be found at www.ergoswiss.com