Catalogs >
EREMA Engineering Recycling Maschinen und Anlagen >
INTAREMA® TVEplus®

INTAREMA® TVEplus®
5Pages

Catalog excerpts

INTAREMA® TVEplus® Recycling system with high-performance degassing

INTAREMA® TVEplus® Filtration, homogenisation and degassing at the highest level. The patented extruder system INTAREMA® TVEplus® sets new standards in the recycling of materials that are difﬁcult to process such as heavily printed ﬁlms and/or very moist materials. This is made possible through ultraﬁne ﬁltration, thorough melt homogenisation and high-performance degassing in a single step. The proven basic principle of TVEplus® technology: melt ﬁltration takes place upstream of extruder degassing. This means you can realise end products which have outstanding high quality. End products...

Open the catalog to page 2

Feeding 1 is automatic according to customer requirements. The material is cut, mixed, heated, dried, pre-compacted and buffered in the patented cutter/compactor 2 . Next, the tangentially connected extruder is ﬁlled continuously with hot, pre-compacted material. The innovative Counter Current technology enables optimised intake action across an extended temperature range. The material is plasticised and degassed in reverse in the extruder screw 3 . At the end of the plasticising zone the melt is directed out of the extruder, cleaned in the fully automatic, self-cleaning ﬁlter 4 and...

Open the catalog to page 3

Innovative, patented additional technology for the EREMA cutter/compactor (optional) Optimised triple degassing • Initial degassing in the EREMA cutter/compactor takes place through preheating and predrying the material • The optimum screw design – tuned to the material to be processed – enables reverse degassing in the cutter/ compactor, thus relieving the degassing zone of the extruder • Gas inclusions in the melt are removed in the extruder degassing zone • Only thoroughly melted, ﬁltered and homogenised material can pass the degassing zone of the extruder Blown ﬁlm test with recyclates,...

Open the catalog to page 4

Headquarters & Production Facilities EREMA Engineering Recycling Maschinen und Anlagen Ges.m.b.H. Unterfeldstraße 3 / A-4052 Ansfelden / Austria Phone: +43 (0)732/31 90-0 / Fax: -23 erema@erema.at / www.erema.com Subsidiaries EREMA NORTH AMERICA INC. 23 Old Right Road - Unit#2 / Ipswich, MA 01938 / USA Phone: +1 978 356-3771 / Fax: -9003 erema@erema.net / www.erema.net EREMA Shanghai Ofﬁce Room 1009 / Tomson Financial Building 710 Dong Fang Road / Pudong / Shanghai China (200122) Phone: +86 21 6876-6201, -6204 / Fax: -6203 erema@erema.com.cn / www.erema.com OOO EREMA Business Park...

Open the catalog to page 5