Catalogs >
EREMA Engineering Recycling Maschinen und Anlagen >
INTAREMA TVEplus

INTAREMA TVEplus
5Pages

Catalog excerpts

Recycling system with high-performance degassing PLASTIC RECYCLING SYSTEMS

INTAREMA® TVEplus® Filtration, homogenisation and degassing at the highest level. The patented extruder system INTAREMA® TVEplus® sets new standards in the recycling of materials that are difficult to process such as heavily printed films and/or very moist materials. This is made possible through ultrafine filtration, thorough melt homogenisation and high-performance degassing in a single step. The proven basic principle of TVEplus® technology: melt filtration takes place upstream of extruder degassing. This means you can realise end products which have outstanding high quality. End...

Open the catalog to page 2

Feeding 1 is automatic according to customer requirements. The material is cut, mixed, heated, dried, pre-compacted and buffered in the patented cutter/compactor 2 . Next, the tangentially connected extruder is filled continuously with hot, pre-compacted material. The innovative Counter Current technology enables optimised intake action across an extended temperature range. The material is plasticised and degassed in reverse in the extruder screw 3 . At the end of the plasticising zone the melt is directed out of the extruder, cleaned in the fully automatic, self-cleaning filter 4 and...

Open the catalog to page 3

Optimised triple degassing Initial degassing in the EREMA cutter/compactor takes place through preheating and predrying the material The optimum screw design - tuned to the material to be processed - enables reverse degassing in the cutter/ compactor, thus relieving the degassing zone of the extruder Gas inclusions in the melt are removed in the extruder degassing zone Only thoroughly melted, filtered and homogenised material can pass the degassing zone of the extruder Blown film test with recyclates, made from fully printed PE-LD film: Single-screw extruder with standard degassing...

Open the catalog to page 4

Headquarters & Production Facilities EREMA Engineering Recycling Maschinen und Anlagen Ges.m.b.H. Unterfeldstraße 3 / A-4052 Ansfelden / Austria Phone: +43 (0)732/31 90-0 / Fax: -23 erema@erema.at / www.erema.at Subsidiaries 3S SCHNECKEN + SPINDELN + SPIRALEN Bearbeitungsges.m.b.H Pühretstraße 3 / A-4661 Roitham / Austria Phone: +43 (0)7613/5004 / Fax: -5005 office@3s-gmbh.at / www.3s-gmbh.at EREMA NORTH AMERICA INC. 23 Old Right Road - Unit#2 / Ipswich, MA 01938 / USA Phone: +1 978 356-3771 / Fax: -9003 erema@erema.net / www.erema.net EREMA Shanghai Office Room 1009 / Tomson Financial...

Open the catalog to page 5