Catalogs >
EREMA Engineering Recycling Maschinen und Anlagen >
INTAREMA® T/TE

INTAREMA® T/TE
5Pages

Catalog excerpts

INTAREMA® T, TE Recycling systems for thermoplastics

INTAREMA® T, TE Performance and ﬂexibility for a fast ROI. The compact INTAREMA® recycling system with short singlescrew extruder is - as the T series - without extruder degassing ideal for non-printed edge trim, cutting waste, rolls, loose leftover ﬁlm and regrind material. The INTAREMA® extruder – TE series – features double degassing for the processing of slightly printed production or industrial waste and technical polymers. INTAREMA® at a glance: 1. Counter Current technology • Highest process stability through improved material intake ensures constantly high output over a considerably...

Open the catalog to page 2

How it works Feeding 1 is automatic according to customer requirements. The material is cut, mixed, heated, dried, compacted and buffered in the patented cutter/compactor 2 . Next, the tangentially connected extruder is ﬁlled continuously with hot, pre-compacted material. The innovative Counter Current technology enables optimised intake action across an extended temperature range. In the extruder screw 3 the material is plasticised, homogenised and, if necessary, degassed in the degassing zone 4 (TE). The melt is then cleaned in the fully automatic, self-cleaning ﬁlter 5 . Following this,...

Open the catalog to page 3

Innovative, patented additional technologies • With patented Double Disc (DD) technology materials with up to 12 % residual moisture can be processed with consistently high output • The patented Air Flush Module increases drying performance and output while ensuring lower energy consumption and extending plant service life Technical data INTAREMA® T and TE • Optimised large EREMA cutter/compactor • Output up to 30 % higher than on conventional extruders thanks to extremely uniform feeding of the tangentially connected extruder • Direct admixing of masterbatch and additives possible • No...

Open the catalog to page 4

Headquarters & Production Facilities EREMA Engineering Recycling Maschinen und Anlagen Ges.m.b.H. Unterfeldstraße 3 / A-4052 Ansfelden / Austria Phone: +43 (0)732/31 90-0 / Fax: -23 erema@erema.at / www.erema.com Subsidiaries EREMA NORTH AMERICA INC. 23 Old Right Road - Unit#2 / Ipswich, MA 01938 / USA Phone: +1 978 356-3771 / Fax: -9003 erema@erema.net / www.erema.net EREMA Shanghai Ofﬁce Room 1009 / Tomson Financial Building 710 Dong Fang Road / Pudong / Shanghai China (200122) Phone: +86 21 6876-6201, -6204 / Fax: -6203 erema@erema.com.cn / www.erema.com OOO EREMA Business Park...

Open the catalog to page 5