DATA SHEET Pallet Collars 1200x800x195x20mm, Industrial Quality, 4 Hinges COMPATIBLE WITH: Wooden, plastic multilevel storage plastic lids Distance keepers Label holders MAIN DATA: Tech. specs.: Pack size: Truck load: Needle and hard wood Kiln dried, max.18%, IPPC treatment 4 metal galvanized hinges 1,25mm (including transportation pallet) 108 pallet collars on used EPAL pallet (other packaging units on request) • Industrial quality pallet collars • Export approved • Kiln dried • Best price-perfomance ratio Imballaggi industrial AUTO CERTIFIED Eredi Caimi S.r.l. - via G. Pascoli 139/141 - 21057 Olgiate Olona (VA) MAIL: [email protected]

DATA SHEET Pallet Collars 1200x800x195x20mm, Industrial Quality, 4 Hinges Dead knots Lack of light blading Pitch pocket Criteria for Industrial Quality Allowed in unlimited quantities and size The diameter of up to 50mm. Maximum - 5 pieces per a workpiece. It is allowed throughout the length. The width of the crack may be up to 2 mm. The crack through is allowed. Rivet should not fall It is allowed on either side and at any volume. Example photo Imballaggi industrial AUTO CERTIFIED Eredi Caimi S.r.l. - via G. Pascoli 139/141 - 21057 Olgiate Olona (VA) MAIL: [email protected]

DATA SHEET Pallet Collars 1200x800x195x20mm, Industrial Quality, 4 Hinges Material moisture Blue stain Criteria for Industrial Quality Any wanes are allowed not reducing the width of the workpiece less than 190mm. The upper part of the loop shall not protrude beyond the edge of the workpiece. The lowest wane of the workpiece is always placed on the open side. Material moisture content shall be 18% (+2; -2 %). The moisture content is measured min 300mm from the edge of the board throughout the length, and width center of the board. It is allowed on either side, if there are no signs of mold. Example...