Best Practice Handling Guidelines The Loadhog Self-Securing Lid

A/ Carrying B/ Securing a load to the Pally The Half Euro Loadhog Lid is designed with integrated handles for ease of carrying/lifting and manoeuvring of the Pally when loaded. 01/ Stack product securely onto Pally 02/ Carry lid using the ergonomic holds 03/ Position over load 04/ Ensure the lid sits firmly over all corners of the load. Lower until lid is securely in place

C/ Attatching the strap 01/ Take hold of hook 02/ Draw out sufficient webbing to reach the Pally 03/ Locate the hook on one side of the Pally pedal D/ Tensioning the strap 01/ Hold the hook in place with your foot 02/ The strap is tensioned by rotating the yellow lever to the left until the strap is sufficiently secure 03/ Repeat both stages on the strap located on the other side of the Loadhog Lid The Pallet should now be fully secure with both straps located and tensioned to the appropriate strength

E/ To release the strap mechanism 01/ Place one hand around the strap 02/ Slide the green “RELEASE” button firmly to the left using your thumb until it engages. Rotate the yellow lever to the left until it stops. Then push the lever in one gentle movement further to the left – this will release the tension in the strap and the strap will be free to retract or extend 03/ Pull a little strapping down (sufficient for the hook to be free from the Pally base). Gently guide the strap back into the lid as it retracts. 04/ Ensure the hook is fully located back in it’s housing in the Lid to prevent damage...