video corpo

ERAVAP Online Brochure
4Pages

{{requestButtons}}

Catalog excerpts

ERAVAP Online Brochure - 1

eravap online PROCESS VAPOR PRESSURE TESTING AT ITS BEST Standards ASTM D6377, D6378, D6897 Vapor pressure of gasoline, crude oil and LPG Excellent correlation to other vapor pressure standards such as ASTM D323, D5188, D5191, EN 13016

Open the catalog to page 1
ERAVAP Online Brochure - 2

eravap online – lab-grade results for your process . Lab-grade Performance Since ERAVAP ONLINE is measuring according to the latest vapor pressure standards and its measurement cell is based on eralytics' laboratory systems, results from ERAVAP ONLINE are identical to laboratory results. There is no need for correlating results in any way. It clearly outperforms the standard methods in terms of repeatability (r = 0.15 kPa) and reproducibility (R = 0.5 kPa). sample measuring cell inlet valve liquid phase outlet valve piston with pressure sensor waste container temperature sensor The...

Open the catalog to page 2
ERAVAP Online Brochure - 3

Minimized Downtime A spare measurement cell delivered with ERAVAP ONLINE minimizes downtimes during calibration or maintenance. While one measurement cell is calibrated and maintained in a safe area, the second one is used for the measurements. They can be swapped in a few simple steps in less than a minute. No tools are required. Measurement cells can be used in any ERAVAP ONLINE analyzer as all necessary operating parameters are stored directly on the cell and read by the main unit when connected. Comprehensive Connectivity ERAVAP ONLINE offers a wide variety of options to transfer data...

Open the catalog to page 3
ERAVAP Online Brochure - 4

Technical Specifications of eravap online Available Test Methods ASTM D6377, D6378, D6897 ASTM D5188, D5191; EN 13016 (without air saturation) Freely programmable methods Temperature Range Temperature Stability Pressure Range Pressure Resolution Vapor / Liquid Ratio Cycle Time Typically 7 min (depending on sample composition) Inlet Streams Up to 4 inlet streams (sample, quality control, rinsing) Analyzer inlet 1/8" compression fittings Sample conditioning system and waste connection 1/2" compression fittings Process Stream Requirements Analyzer: 200 kPa – 300 kPa (without sample...

Open the catalog to page 4

All Eralytics GmbH catalogs and technical brochures