THE SAFE SIDE OF FLASH POINT TESTING Standards ASTM D6450, D7094, IP620 Fuel specifications ASTM D396, D975, D2880, D3699, D7467

eraflash combines maximum safety with highest performance . An ASTM round robin test proved that no statistically significant ASTM D7094 accepted in many fuel specs due to no statistical bias to ASTM D93 bias exists between ASTM D93 and ASTM D7094 for fuels and contaminated fuels. The test report states a repeatability (r) of 4.1 °C for both methods and a reproducibility (R) of 5.5 °C for ASTM D7094 and 6.9 °C for ASTM D93. Consequently, ASTM D7049 is now accepted in the specifications of Fuel Oils (ASTM D396), Diesel Fuel Oils (ASTM D975), Gas Turbine Fuel Oils (ASTM D2880), Kerosene (ASTM D3699)...

No Open Flame, No Glowing Wire, No Fire Hazard The innovative Continuously Closed Cup Flash Point (CCCFP) methods ASTM D6450 and D7094 use only 1 – 2 mL of sample that is sealed in a closed chamber during the whole measurement process. An electrical arc inside the chamber ignites the sample and the lack of oxygen extinguishes the flame automatically. The device measures the corresponding pressure increase inside the chamber. An increase of ≥ 20 kPa is defined as the flash point. High Speed eralytics’ patented PBT – Peltier Boost TechnologyTM allows Ignition inside the continuously closed chamber...

Technical Specifications of eraflash Available Test Methods ASTM D6450/SHT0768, D7094, IP620 US D.O.T, RCRA, NAVY, NATO approved Pre-programmed Correlation Methods Pensky Martens Closed Cup: ASTM D93; D8175; EN ISO 2719; DIN 51758; IP34; JIS K2265 TAG Closed Cup: ASTM D56 Abel Pensky Closed Cup: ISO 13736; IP170 Small Scale Closed Cup and Flash / No Flash methods: ASTM D3828; EN ISO 3679, EN ISO 3680 Fuel Specifications (ASTM D7094) Speed Tests Fast screening test programs for unknown samples PBT – Peltier Boost TechnologyTM High speed heating and cooling: -25 °C – 420 °C (-13 °F – 788 °F) with...