Tubular furnaces for laboratory

Product catalog summary

Specifications:
The maximum internal volume of the furnace is approximately 5 to 7 liters. The internal diameter can be customized up to 200 mm, while the external diameter is available in sizes of 50, 100, 150, 200, and 250 mm. Other shapes such as square or rectangular are possible with any dimension. The maximum length is 1.2 meters.

Fixation and Assembly:
Various methods are available for fixation and assembly, including rods (screwed or smooth) on the side, plates with rubber supports, integration into analytical tools, and more.

Heating and Voltage:
The resistant wire winding can be customized with variable steps or different heating zones to achieve specific temperature profiles. Depending on dimensions and maximum temperature, the main voltage options are 220, 110, 48, or 24 VAC.

Temperature Regulation:
Each furnace includes a tube for thermocouple insertion. Temperature regulation is managed by a digital display, self-adaptive PID type regulator with rising slope and output power under 220 V, available at 1300 or 2600 VA. Other regulation methods are available upon request.

Furnace Variations:
We offer a variety of furnace types, including those with several parallel tubes, different shapes (square, rectangular, half-circular), well-type furnaces, opening furnaces (under conditions), and furnaces with accessories like ventilation or gas input. Protection grids or side cooling by water circulation are also available.

Integration with Gas Lines:
Our furnaces can be combined with gas lines, valves, and various regulations. Contact us for more information.

Standards and Compliance:
We comply with various standards including ASTM D2784, ASTM D2785, AFNOR M41-009, ISO 4260, IP243, DIN 51408, NF.EN 24260, EN41, ASTM D4629, ASTM D6069, ASTM D5176, ASTM D7184, NF EN 12260, NF M 07-058, Tritium, Carbon 14, Chlorine 36, Iodine 129, AOX, Pox, Eox according to ISO 9562, ASTM D5453, ASTM D6667, ASTM D7183, ISO 20846, and NF M0759.

Catalog excerpts

Eraly Associes Elemental Analysis TUBULAR FURNACES for LABORATORY« Customized)) realisation on request For more than 35 years we manufacture tube furnaces for industry and research laboratories. Made of a resistant wire (Fe / Cr / A1 alloy), a tubular refractory support (silimantin or alumina), a stainless steel frame and ceram ic woo] nsulal i on, our ovens are the most robust and the most durable on the market. Our experi use and the reliability of our products are recognized by techn ians and researchers from CEA, CNRS, Universities and industry laboratories. Why order from us?

Open the catalog to page 1

VOLUME: The maximum inside volume is about 5 to 7 litres. DIMENSIONS: Practically any dimension for the internal diameter are possible, to 200 mm. The external diameter is defined with the following sizes: 0 50 / 100 / 150 / 200 / 250 mm. Other shapes for the external steel sheet (square or rectangular...) are possible, with any dimension. Maximum length to 1.2 meter. ASSEMBLING: Different means for fixation and assembly are possible: - by rods, screwed or smooth, on the side - By a plate with rubber supports - By integration in an analytical tool - And so on RESISTANCE: Under conditions, the...

Open the catalog to page 2

Tubular furnace with protection grid

Open the catalog to page 3

Sulfur Analyzer ASTM D5453 / ASTM D6667 / ASTM D 7183 / ISO 20 846 NF M0759 Nitrogen Analyzer ASTM D4629 / ASTM D6069 / ASTM D5176 / ASTM D7184 / NF EN 12260 / NF M 07-058

Open the catalog to page 4

All ERALY & Associés catalogs and technical brochures

Archived catalogs

Continuous measurement of sulfur in gases
3 Pages
Temperature regulator
2 Pages