SULFUR NITROGEN & CHLORINE analyzer
7Pages

TOTAL SULFUR - NITROGEN AND CHLORINE ANALYZER HELIOS SN&CL ACCORDING STANDARDS ASTM D5453 / ASTM D6667 ASTM D7183 / ASTM D7551 UOP 987 / IP490 / SH/T 0689 ISO 20 846 ASTM D4629 / ASTM D6069 ASTM D5762 / ASTM D7184 UOP 981 / UOP 971 / SH/T 0657 ISO 11905 ASTM D4929 / ASTM D5808 ASTM D6721 / ASTM D5194 UOP 779 / UOP 910 ISO 9562 / ISO 11480

HELIOS SN&CL HELIOS SN&CL is the combination of HELIOS S&N and HELIOS CL, without any alteration of the characteristics and performances of each of them. With two separated combustion tubes, one for Sulfur - Nitrogen and another one for Chlorine, this equipment is unrivaled for avoiding samples pollution. Hence it offers a high accuracy, a true reliability and a big robustness. This configuration is made to avoid loosing time and chemicals in rinsing and cleaning your combustion system. It is designed to make your daily life easier and simpler during your analysis. HEILOS SN&CL, a single...

NEW GENERATION DETECTORS - Sulfur and Nitrogen Thanks to the configuration Back-end sensor this new generation of Sulfur detector is more sensitive and up to 20% more accurate than the previous. The Nitrogen detector has an on/off function of measuring compensation of chamber pressure, sample pressure, internal temperature in accordance with the values uring calibration. This d function among others, helps to increase accuracy of measurements. Sulfur Detector Ultra low power consumption: an environmentally-friendly and cost-saving analyzer. Pressure and temperature compensation for high...

CHLORINE - HIGH PERFORMANCE AND FLEXIBILITY Accuracy, repeatability and reliability are the keys. We offer single analyzer with two titration cells, which could be placed at the same time: Cell of medium volume, used for sample having less than 1 ppm to 3000 ppm. Cell of large volume, used for sample from 1000 ppm to 80% (withtout dilution). Accordingly, we offer three types of electrolytes: electrolyte very low concentration, for taces, for samples less than 1 ppm. electrolyte low concentration for samples 1ppm to 300ppm. electrolyte high concentration for samples 1000ppm to 80% (without...

• Absolute titration method (as in volumetry). No need to calibrate, auto calibration and absolute method (it is possible to calibrate if you wish). • Replacing the H2SO4 absorber with drying / flushing system automatically managed by the device. This helps avoid handling acid. • Measure of very small quantities of electricity, up to 0.1 nano Faraday and very large up to 100 nano Faraday. TECHNICAL SPECIFICATIONS ERALY & ASSOCIES - France - Mail: contact@eraly.com

As a manufacturer of tubular furnaces for industry and scientific research, we pay particular attention to the design and manufacturing of the combustion systems and combustion tube for our analyzers. Nowadays, some famous international brands use our furnaces for their analyzers, this is the sign and proof that we have wide know-how and better technology. TThe combustion efficiency, has a direct impact to measurment results. Combustion with injection and oxydation temperature well controlled, whithout soot production is one of the key of reliable measurement. • Very robust furnace,...

KIT’S IMPORTANT TO HAVE CHOICE Gas and LPG SAMPLER Compatible with standard: ASTM D6667. Composed of 2 sampling loops, one for gas and one for LPG. Used for sampling and injecting Butane, Propane, Methane, Natural Gas, Hydrocarbons methane, calibration gas mixes, etc.).