Technical Specifications
The solenoid valve is designed for direct operation with two ways (2/2 NC). It is compatible with air, water, gas, light oil, and vacuum. The differential pressure range is from 0 to 100 bar maximum. The fluid temperature can reach up to 100°C, while the ambient temperature ranges from -10°C to +50°C. The maximum viscosity allowed is 40 centistokes. The valve can be mounted in any position and weighs 280 grams with the coil. The opening or closing time is a maximum of 20 milliseconds.

Pressure Specifications
The document provides detailed pressure specifications for different media (air, gas, water, oil) and various port sizes. It includes information on the pressure range, Kv values, and seal materials (NBR, EPDM, FKM) for different configurations. The maximum fluid temperature is specified for each seal type.

Electrical Data
The solenoid valve operates at various voltages (24-48-110-230V AC and 12-24-48V DC) with a continuous duty cycle of 100%. The power consumption is 30 VA inrush and 14 VA holding for AC, and 10W to 20W for DC. The insulation class is F (155°C), and the enclosure is rated IP 65 with a connector. Electrical connections are made via 3 spades conforming to DIN standards.

Construction
The valve body is made of brass, with stainless steel used for the tube and internal parts. Seals and gaskets are available in NBR, EPDM, or FKM. The coil is moulded in polyamide.

Options
Available options include a PG9 connector, flow control screw for diameters 2 to 4 mm, manual override up to 4 mm diameter, and an explosion-proof enclosure compliant with ATEX standards.

Repair Kits
Repair kits are available for the coil and complete plunger with O-rings. The ordering codes are provided for different seal materials.