20051

20051

20051

Product catalog summary
Technical Specifications
The solenoid valve type 20051 is a 2/2 normally closed, direct-operated valve suitable for various media including air, water, gas, light oil, and vacuum. It operates within a pressure range of 0 to 50 bar and can handle media temperatures up to 80°C. The ambient temperature range is -10°C to +50°C, and it supports media viscosity up to 40 centistokes. The valve can be mounted in any position and weighs 140 grams with the coil. The opening or closing time is a maximum of 20 milliseconds.
Pressure Specifications
The valve supports different pressure levels depending on the media and seal type. For air and gas, the pressure ranges from 0 to 50 bar, while for water and oil, it ranges from 0 to 40 bar. The valve uses seals made of NBR, EPDM, or FKM, with maximum fluid temperatures of 60°C to 80°C depending on the seal material.
Electrical Data
The valve operates on AC voltages of 24, 48, 110, and 230 volts (50 or 60 Hz) with an inrush power of 14 VA and holding power of 9 VA. For DC, it operates on 12, 24, and 48 volts with a power consumption of 6 W. It has an insulation class of F (155°C) and an enclosure rating of IP 65 with a connector.
Construction
The valve body is made of brass, with stainless steel used for the tube and internal parts. Seals and gaskets are available in NBR, EPDM, or FKM, and the coil is moulded in polyamide.
Options
Available options include a PG9 connector, flow control up to 3 mm seat, and manual override for sizes 2 to 4 mm.
Repair Kits
Repair kits are available for the coil and complete plunger with O-rings, identified by the code KIT20051 plus the seal material.
See more

Catalog excerpts

20051-1

ELECTROVANNE 2/2 NF 2 VOIES A COMMANDE DIRECTE SOLENOID VALVE 2/2 NC 2 WAYS DIRECT OPERATED TYPE 20051 SPECIFICATIONS TECHNIQUES TECHNICAL SPECIFICATIONS Fluides admis : air - eau - gaz - huile légère - vide Pression différentielle : 0 à 50 bar maxi Température du fluide : 80° C maxi Température ambiante : -10° à +50° C maxi Viscosité : 40 centistokes maxi Position de fonctionnement : indifférente Poids (avec bobine) : 140 g Temps d’ouverture ou fermeture: 20 millisecondes maxi Media: air - water - gas - light oil - vacuum Pressure range : 0 to 50 bar max Media temperature : 80° C max Ambient temperature : -10° to +50° C max Media viscosity : 40 centistokes max Mounting : any position Weight (including coil) : 140 g Opening or closing time : 20 milliseconds maximum PRESSION PRESSURE Pression / Pressure (bar) Kv L/mn 1 0.55 1.5 ∅ Raccord ∅ Port ∅ passage (mm) ∅ seat (mm) air - gaz / air - gas mini CC / DC CA / AC 0 50 40 50 40 1.2 0 30 16 30 16 2 1.9 0 16 8 16 8 2.5 0 8 3.5 8 3.5 4 3.8 0 4 1 4 1 60 80 80 60 80 80 60 80 80 60 80 80 60 80 80 CC / DC 3 1/8 GAZ 1/8 BSP CA / AC Etanchéité seals Codification pour commande Voir tableau des codifications Code to order See table of references Fluid temp. Max °C NBR EPDM FKM NBR EPDM FKM NBR EPDM FKM NBR EPDM FKM NBR EPDM FKM eau - huile / water - oil 21051+10+0181+voltage+option 21051+30+0181+voltage+option 21051+20+0181+voltage+option 21551+10+0181+voltage+option 21551+30+0181+voltage+option 21551+20+0181+voltage+option 22051+10+0181+voltage+option 22051+30+0181+voltage+option 22051+20+0181+voltage+option 23051+10+0181+voltage+option 23051+30+0181+voltage+option 23051+20+0181+voltage+option 24051+10+0181+voltage+option 24051+30+0181+voltage+option 24051+20+0181+voltage+option CARACTERISTIQUES ELECTRIQUES ELECTRICAL DATA Tension / voltage (-10% + 15%) Durée d’enclenchement 100% Continuous duty 100% Au maintien Holding 14 VA ∼ 24-48-110-230 (50 ou/or 60 Hz) A l’appel Inrush Degré de protection Enclosure Raccord électrique Electrical connections IP 65 avec connecteur with connector 3 fiches 3 spades DIN 43650 DIN 40050 VDE 0110 9 VA 22 = 12-24-48 Classe d’isolation Insulation class F 155°C Puissance / Power Taille Size 6W

 Open the catalog to page 1
20051-2

ELECTROVANNE 2/2 NF 2 VOIES A COMMANDE DIRECTE SOLENOID VALVE 2/2 NC 2 WAYS DIRECT OPERATED TYPE 20051 ENCOMBREMENT OVERALL DIMENSIONS CONSTRUCTION CONSTRUCTION Corps : laiton Tube et pièces internes : acier inoxydable Joints et clapets : NBR ou EPDM ou FKM Bobine surmoulée : Polyamide Body : brass Tube and internal parts : stainless steel Seals and gaskets : NBR or EPDM or FKM Moulded coil : Polyamide OPTIONS OPTIONS Connecteur PG9 – DIN 43650 B Vis de réglage de débit jusqu’au DN 3 mm Ouverture manuelle du DN 2 au 4 mm Connector PG9 – DIN 43650 B Flow control up to 3 mm seat Manual override...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.