*mydirectindustry

200201

Product catalog summary

Technical Specifications
The solenoid valve type 200201 is a 2/2 normally closed (NC) or normally open (NO) valve with direct operation. It is suitable for various fluids including air, water, gas, light oil, and vacuum. The valve operates within a pressure range of 0 to 30 bar and can handle fluid temperatures up to 100°C. The ambient temperature range is -10°C to +50°C, with specific ATEX versions allowing up to +60°C. The valve can be mounted in any position and weighs 300 grams with the coil. The opening or closing time is a maximum of 20 milliseconds.

Pressure Specifications
The valve is available in different port sizes (1/8, 1/4, 3/8 BSP) with varying flow coefficients (Kv) and pressure ratings. The pressure specifications are detailed for both NC and NO configurations, with specific codes provided for ordering based on the desired configuration and options.

Electrical Data
The valve operates on various voltages (24-48-110-230V AC or 12-24-48V DC) with a continuous duty cycle of 100%. The power consumption is 30 VA inrush and 26 VA holding for AC, and 10-20 W for DC. The insulation class is F (155°C) and the enclosure is rated IP65 with a DIN 43650 connector.

Construction
The valve body is made of brass, with stainless steel internal parts. Seals and gaskets are available in NBR, EPDM, or FKM. The coil is moulded in polyamide.

Options
Available options include a PG9 connector, explosion-proof enclosure for NC versions, manual override, NPT thread, and an ATEX-rated coil.

Repair Kits
Repair kits are available, including coils and complete plunger sets with O-rings. Specific codes are provided for ordering these kits.

Catalog excerpts

ELECTROVANNE 2/2 NF ou NO 2 VOIES A COMMANDE DIRECTE SOLENOID VALVE 2/2 NC or NO 2 WAYS DIRECT OPERATED TYPE 200201 SPECIFICATIONS TECHNIQUES TECHNICAL SPECIFICATIONS Fluides admis : air – eau - gaz - huile légère - vide Pression différentielle : 0 à 30 bar maxi Température du fluide : 100° C maxi Température ambiante : -10° à +50° C maxi Température ambiante version Atex : -10° C+40° en T6 et -10° C c+60°C en T4 Viscosité : 40 centistokes maxi Position de fonctionnement : indifférente Poids (avec bobine) : 300 g Temps d’ouverture ou fermeture: 20 millisecondes maxi Media : air – water – gas – light oil - vacuum Pressure range : 0 to 30 bar max Media temperature : 100° C max Ambient temperature : -10° to +50° C max Ambiant Temperature Atex version -10° C+40° in T6 and -10° C C+60°C in T4 Media viscosity : 40 centistokes max Mounting : any position Weight (including coil) : 300 g Opening or closing time : 20 milliseconds maximum PRESSION PRESSURE TYPE TYPE Codification pour commande Voir tableau des codifications Code for order See table of references CARACTERISTIQUES ELECTRIQUES ELECTRICAL DATA Tension / voltage (-10% + 15%) Durée d’enclenchement 100% Continuous duty 100% Taille Size Puissance / Power A l’appel Au maintien Inrush Holding 26 VA Classe d’isolation Insulation class Degré de protection Enclosure IP 65 avec connecteur with connector Raccord électrique Electrical connections 3 fiches 3 spades DIN 43650 DIN 40050 VDE 0110

Open the catalog to page 1

2 VOIES A COMMANDE DIRECTE 2 WAYS DIRECT OPERATED OVERALL DIMENSIONS Corps: laiton Tube et pieces internes : acier inoxydable Joints et clapets : NBR ou EPDM ou FKM Bobine surmoulee: Polyamide OPTIONS / OPTIONS^^^M Capot anti-def lag rant: mode de protection II 2 G/D Ex d IIC T6 ou T4 suivant ATEX (version NF Body: brass Tube and internal parts : stainless steel Seals and gaskets : NBR or EPDM or FKM Moulded coil: Polyamide Explosion proof enclosure: protection II2 G/D Ex d IIC T6 or T4 according to ATEX (NC version Coil EEx m according to ATEX II2G T4 IP65 130 <C 17, rue Jean Poulmarch - BP30...

Open the catalog to page 2

200201

200201

Catalog excerpts

All ERA-SIB catalogs and technical brochures