Overview

This document provides technical specifications and installation guidelines for the Die Arm Model RD, a hanging tool arm system used in industrial applications. It includes detailed parameters for various model types, their capacities, dimensions, and mounting requirements.

1. Model Identification and Specifications

The document lists multiple model numbers under the "C Type" and "RD" series, such as 1030-RD05125, 1030-RD07160, and 1030-RD09160. Each model is associated with specific technical parameters including required die length, maximum capacity, total length, and support sizes.

Key Parameters per Model:

• Required Die Length (L): Ranges from 500 mm to 900 mm depending on the model.
• Maximum Capacity: Varies from 550 kgf to 1250 kgf, indicating the load each model can handle.
• Total Length (A): Spans from 645 mm to 1130 mm, representing the overall arm length.
• Support Size and Hanging Dimensions (DX, Y, HB): Detailed measurements are provided for proper installation and support sizing.

2. Installation and Mounting Guidelines

The document emphasizes the importance of the hanging length (Y) for the Model RD, specifying that it must be less than the height between the plate and the ground to ensure proper installation and operation.

Hole patterns for mounting are categorized by types A, B, and C, each corresponding to different plate configurations and installation requirements.

3. Cylinder and Roller Specifications

The number of cylinders or rollers varies by model, ranging from 5 to 11 units, which correlates with the maximum capacity and size of the arm.

4. Summary Table Insights

The tabulated data provides a comprehensive comparison across models, highlighting:

• Increasing die length and capacity with model number progression.
• Consistent hole pattern sizes (mostly 62 mm or 130 mm) for mounting.
• Incremental increases in total length and support sizes to accommodate heavier loads.

5. Recommendations and Best Practices

• Ensure the hanging length (Y) is always less than the distance from the plate to the ground to avoid installation issues.
• Select the model based on the required die length and maximum load capacity to maintain safety and performance.
• Use the specified hole patterns (A, B, or C type) for secure mounting.

Conclusion

This technical document serves as a detailed reference for selecting and installing the Die Arm Model RD series. It provides critical dimensional data, load capacities, and installation instructions to ensure optimal performance and safety in industrial settings.