Specifications:
The Hydraulic Clamp Model CA is designed with a standard hydraulic pressure of 250 kgf/cm². The clamps are available in various sizes (A, B, C) based on the size of the T-slot. The maximum thickness of the clamp (H+d) should not exceed the listed maximum value.

Standard Temperature:
The standard operating temperature is 60°C.

Model Variants:
The product is available in several models: CA-1, CA-2, CA-4, CA-6, CA-10, CA-16, and CA-25, each with different specifications for clamping capacity, total stroke, and cylinder volume.

Technical Data:
- Clamping capacity ranges from 1 to 25 tons.
- Total stroke (X) is consistent at 8 mm across models.
- Stroke of clamp (Y) and preserved stroke (Z) are both 4 mm.
- Cylinder volume varies from 3 cc to 76 cc.
- Template thickness tolerance (H) is ±1.5 mm to ±2 mm.

Dimensional Data:
- Reference numbers range from 1010-CA01 to 1010-CA25.
- Various dimensions such as PØF, E, ØG, ØJ, and maximum values for H+d and L are provided for each model.

Recommendations:
Ensure the T-slot size is indicated when purchasing to match the die template thickness (H) with the clamp model.