*mydirectindustry

Catalogs
ept
501-50096-183

501-50096-183

1 / 5 PagesView full catalog

501-50096-183

Product catalog summary

Technical Specifications

Specification: Complies with PICMG MTCA.0 R1.0.
Contacts: Total of 96 contacts (24 power, 72 signal).
Termination Technology: Press-fit with a length of 3.5 mm.
Operating Temperature Range: -55°C to +105°C.
Material: Insulator made of PBT glass filled, UL 94 V-0; contacts made of copper alloy.

Mechanical Properties

Mating and Separating Force: Maximum 50 N.
Durability: Supports up to 200 mating cycles.

Electrical Properties

Operational Current: Power contacts up to 12 A, signal contacts up to 1 A.
Insulation Resistance: ≥ 10⁸ Ω.
Test Voltage: 80 V r.m.s.

Compliance

Approval: UL file E130314.
Environmental Compliance: RoHS compliant.

Hole Specifications

Plated Through-Hole: According to IEC 60352-5.
Material: Immersion Sn and Ni, Au printed circuit boards.
Nominal Hole Diameter: 0.6 mm.
PCB Thickness: Minimum 1.44 mm.
Plated Hole Diameter: 0.60 ±0.05 mm.
Drill Hole Diameter: 0.70 ±0.02 mm.
Copper Plating: Minimum 25 µm.
Surface Plating: Maximum 1.5 µm for Sn; 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni for Ni, Au.
Annular Ring: Minimum 0.1 mm.

Additional Resources

Component data available in 2D and 3D formats for download.

Catalog excerpts

Product Data Sheet MTCA Power Module Output, Part No. 501-50096-183 Illustration similar contacts: 72 signal, 24 power Press-fit according to PICMG specifications » to product group Micro TCA Version from 18.01.2023, 10:04 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | [email protected] | www.ept.de

Open the catalog to page 1

Product Data Sheet MTCA Power Module Output, Part No. 501-50096-183 Technical Specifications Basics Specification No. of Contacts Termination Technology Termination Length Operating Temperature Range Material Insulator Material Contact Material PBT glass filled, UL 94 V-0 Copper alloy Mechanical Mating Force Separating Force Electrical Operational Current Insulation Resistance Test Voltage Power contacts: max. 12 A, Signal contacts: max. 1 A ≥ 108 Ω 80 V r.m.s. Approval / Compliance UL file Environment Version from 18.01.2023, 10:04 - subject to change without notice ept GmbH | Bergwerkstr. 50...

Open the catalog to page 2

Open the catalog to page 3

Product Data Sheet MTCA Power Module Output, Part No. 501-50096-183 Hole Specifications Plated through-hole according to IEC 60352-5 Material Nominal Hole A PCB Thickness B Plated Hole imm. Sn printed circuit boards Ø 0.6 mm min 1.44 mm Ø 0.60 ±0.05 mm E Surface F Annular Ring Material Nominal Hole A PCB Thickness B Plated Hole max. 1.5 µm; imm. Sn plating min. 0.1 mm Ni, Au printed circuit boards Ø 0.6 mm min 1.44 mm Ø 0.60 ±0.05 mm E Surface F Annular Ring Version from 18.01.2023, 10:04 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01...

Open the catalog to page 4

Powered by TCPDF (www.tcpdf.org) Product Data Sheet MTCA Power Module Output, Part No. 501-50096-183 Drawings Component data in 2D and 3D format you can download here: » PDF Version from 18.01.2023, 10:04 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | [email protected] | www.ept.de

Open the catalog to page 5

All Ept catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list