Catalogs >
Epsilon Technology >
Model 3543 Long Gage Length Extensometer

Model 3543 Long Gage Length Extensometer
1Pages

Catalog excerpts

Model 3543 Long Gage Length Extensometer - 1

Technology Corp This model is available in gage lengths from 2 inches (50 mm)and larger,with measuring ranges up to 4 inches (100 mm). It is a uniquely designed unit that may be left on through specimen failure.These extensometers are widely used where long samples are required.They are ideal for testing steel re-bar,weld joints,and wire materials. > Model 3543 Available Versions: ANY combination of gage length, measuringrange and temperature range listed below is available, except as noted. Longergage lengths are easily attained by adding gage length extenders. Gage Length Օ -100M 100.0 mm -025M +25 mm > 3543 with 100 mm gage length and 100 mm measuring range. -050M > 1 +50 mm > Е Temperature Range S PECIFICATIONS -ST -40 ˚C to 100 ˚C (-40 ˚F to 210 ˚F) -HT1 -40 ˚C to 150 ˚C (-40 ˚F to 300 ˚F) > Excitation: 5 to 10 VDC recommended, 12 VDC or VAC max. Output: 2 to 4 mV/V nominal, depending on model 1 Linearity: ≤ 0.15% of full scalemeasuring range Not available in 50 mm or 2 inch models. 3543 with 50 mm gage length and 25 mm measuring range. Temperature Range: Standard (-ST) is -40 C to +100 а C (-40 F to 210 аF) Example: 3543-0800-400T-ST: 8.0 inch gage length, +4 inch measuring range, standard temperature range Cable: Ultra-flexible cable, 8 ft (2.5 m) standard Standard QuickAttach Kit: (-40 ˚ F to 210 ˚ F) Fits round samples up to 1.0 inch diameter (25 mm) andflats to 0.5 inch thick by 1.25 inch wide (12 mm by 31 mm) Operating Force: 125 g typical O PTIONS 3543 foam lined storage case (included). Quick attach kit wire forms for large specimensConnectors to interface to nearly any brand test equipment Shunt calibration module (see page 96) Adapter kits to change gage lengths Specialty knife edges (see page 97) 3.7194.32 inch [ 50 mm ]gage length3.8698.1 3.86 98.1[ 200 mm ]8 inchgage length9.71246.7 3.86 98.1[ 100 mm ]4 inchgage length5.71145.1 3543 with 12 gagelength and 2Ԕ measuring range.3543 with 600 mmgage length and 100 mm measuring range. Contact Epsilon for your special testing requirements. 3543 WITH 8 OR 200 MM GAGE LENGTH 3543 WITH 2Ԕ OR 50 MM GAGE LENGTH 3543 WITH 4 OR 100 MM GAGE LENGTH DIMENSIONS:[mm] inches 14 15 >

Open the catalog to page 1