DECONTAMINATION BOOTH WATER HEATER TANK 450 LITERS EMERGENCY SHOWER & EYEWASHERS TEMPERING WATER DESCRIPTION Cabine built in a special structure of treated wood and yellow polyuretane coated, specially designed to resist very corrosive environmetals and low temperatures conditions. Swinging doors. Piping, fitting and tank in stainless steel AISI 304L. Shower head 220 mm stainless steel “diluvio type”, with air baffle delivering a 500 mm in diameter water cone. Eyewash include stainless steel assembly of flow control and heads which delivers a soft and air water flow with eyewash and facewash effect. Activation with stainless steel stay-open valves and stainless steel activation levers with instruction panel built-in. Stainless steel ball valves. The electrically heated water tank have been developed to supply warm water "Tempering Water" to the safety showers and emergency eyewash. The hot water stored in the stainless steel tank of 450 liters is mixed with cold water supply through of a thermostatic mixing valve protected against scald. This Tempering Water Decontamination Booth is supplied in one module ready to use. Hooks for lift and holes for forklift truck included. CHARACTERISTICS OF PERFORMANCE EMERGENCY SHOWER FLOW (values for standards met) 76 Litres per minute during 15 minutes EMERGENCY EYEWASH FLOW (values for standards met) 11,5 Litres per minute during 15 minutes WATER INLET: 1‐1/2” ANSI FLANGE DRAIN EXIT: 1‐1/4” BSP – FEMALE OPTIONAL ACCESSORIES: Sound and light alarm (ATEX available) Swich Flow (ATEX available) External lighting (ATEX available) Internal Lighting (ATEX Available) Cabine Electrical Heater (ATEX Available) Platform to Shower Operation Authomatic valve Anti‐Freeze Authomatic valve Anti‐Scald MANUFACTURER'S RECOMMENDATIONS The working pressure should be between 2,0 Bar and 7.0 Bar, measured at the inlet The potable water supply shall be pr