SHOWER & EYEWASHER PLASTIC MODEL FOR VERY CORROSIVE ZONES DESCRIPTION Structure built in AST Polypropylene with thermofusion joints, especially for highly corrosive areas. Shower head with a diameter of 250 mm, made of deluge type ABS plastic with relief baffle, which produces a water bell with a diameter of 500 mm. Handle shower by plastic hand lever and stainless steel handle with indicator and instructions for use and polypropylene valve with stainless steel ball. Eyewash with stainless steel spray nozzles that produce aerated water with eye/face wash effect and automatic anti-dust caps. It has pressure and flow regulator. Eyewash operation by plastic hand lever and polypropylene valve with stainless steel ball with indicator and instructions for use incorporated. CHARACTERISTICS OF PERFORMANCE EMERGENCY SHOWER FLOW (values for standards met) 76 Litres per minute during 15 minutes EMERGENCY EYEWASH FLOW (values for standards met) 11,5 Litres per minute during 15 minutes Sound and light alarm (ATEX available) Swich Flow (ATEX available) External lighting (ATEX available) Spill‐proof water collector Privacy curtain MANUFACTURER'S RECOMMENDATIONS The working pressure should be between 1.5 Bar and 5.0 Bar, measured at the inlet The potable water supply shall be provided always it’s