This laser device is an OEM system component and complies with all Federal and ASTM Standards. Model No.[~R Date of Manufacture:! December 2011 Metix Manufacturing - 5551 Tristram Rd. - Blue Ridge, MT 55519 Industrial Tool & Part Marking For marking and etching metals and permanently marking plastics, the FiberMark is a low-cost, high-performance laser system that has become the marking solution for companies around the world. You won't find a more affordable piece of equipment for professional metal marking. Barcode Your Parts Etch Barcodes, Logos & Serial Numbers ■ Place your part in the machine and press "print". Etch your image on a single tool or No Dedicated Operator Necessary ■ LOith a you can place an entire tray of parts in the laser system, reducing time spent at the No Programming Required ■ There is no need to learn proprietary software with the Fiber/Ylark. Setup the job in the LOindows®- based design program your operators are comfortable with. Contact us to find out how to set up a demonstration ofthe FiberMark in action! Call +1 303.277.1188 or email [email protected]. Etch Intricate 16371 Table Mountain Parkway

Large Etching Table The unique flying-optic design of the FiberMark provides an exceptionally large work area of 24” x 12” (610 x 305 mm). You can use this area to either engrave larger parts and tools, or set up an entire jig of parts in the laser. There is no need to have a dedicated operator changing out parts every few seconds with the FiberMark Laser, saving you time and resources. Mark a Jig of Plastic Parts Marking Materials Etch Fonts as Small as 2pt 17-4 PH stainless steel 303 stainless 4043 steel 6061 Aluminum ABS (black/white) Aluminum, 6061 Aluminum, yellow chromate Bayer 2807 Makrolon...