Bimetallic switches • switching points up to +200°C • standard tolerance ±5 K, (±2,5 K available) • switching current up to 25 A • vacuum-tight versions • high response sensitivity • special designs on request, also UL - approved - EPHYMESS Bespoke sensor technology. Worldwide. Our expertise for your product EPHYMESS GmbH is a competent solution partner of all manufacturers of electrical machines and drives. We consult, develop and produce for our customers individual sensor solutions for safety and control requirements. Our focus is on the following market segments: rail technology, renewable energy and the general industrial segment. Since 1955 the mid-sized and family-owned company, located in Wiesbaden, manufactures high-quality sensor solutions for monitoring electric drives and machines. Our sensors are used by customers of the following sectors: industry and plant engineering, heavy equipment construction, traffic engineering, wind power stations, refrigeration engineering, air-conditioning technology as well as in the measurement and control technology or in laboratory and research facilities. The product portfolio contains platinum and nickel measuring resistors, thermocouples, PTC / NTC thermistors, KTY sensors, bimetallic switches electric band heaters as well as speed sensors and oil level gauges for use in rolling stock. Intensive research and development as well as a highly developed quality management ensure our high product standards. EPHYMESS has numerous utility models and patents, IECEx and ATEX certifications, certifications acc. DIN EN ISO 9001, DIN EN ISO 14001 and ISO/TS 22163 (IRIS), TR certificates, Metrological Certificates and 1st Calibrationa as well as certifications according to UL/CSA (NEC500 / 505) CCC and INMETRO. Wind power sensors for use in wind turbines, hydro power plants and renewable energies nominal switching temp. (NST): resetting temperature: standard tolerances: nominal/ switching current: dielectric strength: dimensions: supply line: length: cross section: designs: single, double or triple bimetallic switches, normally closed or normally open +60°C ... +200°C special versions from 0°C to +450°C >30°C ±15 K below NST ±5 K for respective NST 2.5 A / 6.3 or 10 A / 25 A up to 2 kV with insulation cap e.g. 0 9.4 mm x 4.8 mm x l6 mm e.g. single litzes,FEP- or PTFE-insulated 300 mm (standard) other length on request 0,25 mm2 ... 0,75 mm2 shrinking tube insulated, Mylar-, Mylar-Nomex cap, metal sleeve, screw-in housing, flange housing Your contacts at EPHYMESS GmbH Director Sales Internet Address Phone Fax Mail Ingmar Wege Telefon: +49 6122 9228-54 [email protected] EPHYMESS We reserve the right to modify specification and dimensions. EPHYMESS®, the EPHYMESS® Logo and the stylised icon are trademarks of EPHYMESS GmbH. © 2023 EPHYMESS GmbH. All Rights reserved. ► for geared and direct drive on- and offshore systems ► kV- resistant versions up to 10 kV ► redundant versions with 4... 20 mA ► individual special solutions ► resistant to shock, pressure and vibration

Cable resistance thermometers • custom-made sensors • kV- resistant versions up to 10 kV • temperature range up to +400°C / +752°F • for the use in hazardous areas • special versions on request Screw-in resistance thermometers • versions with Pt measuring resistors, PTC thermistors or thermocouples • either with fixed or adjustable process connection • simple and quick installation with clamp screw connection • mounting with adapter or flange • version with spring-loaded immersion sheath on request • optional with integrated head-mounted transmitter (4-20 mA) • for use in hazardous areas Thermistors...